ON Semiconductor
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
FDMF5826DC
צפה בפרטים DataSheets

FDMF5826DC

Product Overview

Category

The FDMF5826DC belongs to the category of integrated power modules.

Use

It is primarily used for power management applications in various electronic devices.

Characteristics

  • Integrated power module with advanced features
  • High efficiency and reliability
  • Compact size for space-constrained designs
  • Easy to integrate into circuit boards

Package

The FDMF5826DC comes in a compact package that ensures efficient heat dissipation and protection against external factors.

Essence

The essence of the FDMF5826DC lies in its ability to provide efficient power management solutions in a compact form factor.

Packaging/Quantity

The FDMF5826DC is typically packaged individually and is available in various quantities depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.5V to 5.5V
  • Maximum Output Current: 25A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The FDMF5826DC has a specific pin configuration that enables easy integration into circuit designs. The detailed pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VCC: Power supply pin
  4. EN: Enable pin
  5. PGND: Power ground pin
  6. BOOT: Bootstrap capacitor pin
  7. PHASE: Phase node pin
  8. SW: Switching node pin
  9. FB: Feedback pin
  10. SS/TR: Soft-start/Tracking pin

Functional Features

  • Integrated high-side and low-side MOSFETs
  • Advanced control algorithms for efficient power conversion
  • Protection features such as overcurrent and overtemperature protection
  • Adaptive dead-time control for improved efficiency
  • Fault detection and reporting mechanisms

Advantages and Disadvantages

Advantages

  • High efficiency leading to reduced power consumption
  • Compact size allows for space-saving designs
  • Integrated protection features enhance system reliability
  • Easy integration into circuit boards simplifies the design process

Disadvantages

  • Limited output current compared to some other power modules
  • Higher cost compared to discrete power components

Working Principles

The FDMF5826DC operates on the principle of pulse-width modulation (PWM) to regulate the output voltage. It uses a combination of high-side and low-side MOSFETs to efficiently convert the input voltage to the desired output voltage.

Detailed Application Field Plans

The FDMF5826DC finds applications in various fields, including but not limited to: - Consumer electronics - Telecommunications - Industrial automation - Automotive electronics - Power supplies

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the FDMF5826DC include: - FDMF6823C: Integrated power module with higher output current capability - FDMF7730C: Integrated power module with additional protection features - FDMF9933C: Integrated power module with wider input voltage range

These alternative models can be considered based on specific application requirements and design constraints.

Word count: 431 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של FDMF5826DC בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of FDMF5826DC in technical solutions:

  1. Q: What is FDMF5826DC? A: FDMF5826DC is a highly integrated power module designed for use in various technical solutions, such as servers, gaming consoles, and industrial applications.

  2. Q: What are the key features of FDMF5826DC? A: The key features of FDMF5826DC include high efficiency, integrated MOSFETs, advanced protection features, and a compact form factor.

  3. Q: What is the input voltage range supported by FDMF5826DC? A: FDMF5826DC supports an input voltage range of typically 4.5V to 18V, making it suitable for a wide range of applications.

  4. Q: Can FDMF5826DC handle high current loads? A: Yes, FDMF5826DC is capable of handling high current loads, with a maximum continuous output current of typically 60A.

  5. Q: Does FDMF5826DC require any external components for operation? A: No, FDMF5826DC is a fully integrated power module, meaning it does not require any additional external components for basic operation.

  6. Q: What is the efficiency of FDMF5826DC? A: FDMF5826DC offers high efficiency, typically above 90%, which helps to minimize power losses and improve overall system performance.

  7. Q: Can FDMF5826DC operate in a wide temperature range? A: Yes, FDMF5826DC is designed to operate reliably in a wide temperature range, typically from -40°C to 125°C.

  8. Q: Does FDMF5826DC provide any protection features? A: Yes, FDMF5826DC includes various protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  9. Q: Can FDMF5826DC be used in both single-phase and multi-phase configurations? A: Yes, FDMF5826DC can be used in both single-phase and multi-phase configurations, providing flexibility in system design.

  10. Q: Is FDMF5826DC compatible with industry-standard control interfaces? A: Yes, FDMF5826DC is compatible with industry-standard control interfaces such as PMBus and I2C, allowing for easy integration into existing systems.

Please note that the answers provided here are general and may vary depending on the specific application and implementation of FDMF5826DC.