ON Semiconductor
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
74F2244SC
צפה בפרטים DataSheets

Encyclopedia Entry: 74F2244SC

Product Overview

Category

The 74F2244SC belongs to the category of integrated circuits (ICs) and specifically falls under the family of digital logic devices.

Use

This product is commonly used in electronic systems for signal amplification, buffering, and level shifting. It serves as a bidirectional octal buffer/line driver with 3-state outputs.

Characteristics

  • Octal buffer/line driver
  • Bidirectional functionality
  • 3-state outputs
  • High-speed operation
  • Low power consumption

Package

The 74F2244SC is typically available in a small outline integrated circuit (SOIC) package. This package offers a compact form factor and ease of integration into various electronic systems.

Essence

The essence of the 74F2244SC lies in its ability to provide efficient signal buffering and driving capabilities, ensuring reliable communication between different components within an electronic system.

Packaging/Quantity

The 74F2244SC is commonly packaged in reels or tubes, containing multiple units per package. The exact quantity may vary depending on the supplier and customer requirements.

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Input Voltage: 0V to Vcc
  • Output Voltage: 0V to Vcc
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay Time: 6ns (typical)
  • Output Current: ±24mA

Detailed Pin Configuration

The 74F2244SC features a 20-pin configuration, with each pin serving a specific function. Here is a detailed pinout:

  1. A1: Input/Output A1
  2. B1: Input/Output B1
  3. GND: Ground
  4. A2: Input/Output A2
  5. B2: Input/Output B2
  6. A3: Input/Output A3
  7. B3: Input/Output B3
  8. OE: Output Enable
  9. Vcc: Supply Voltage
  10. B4: Input/Output B4
  11. A4: Input/Output A4
  12. B5: Input/Output B5
  13. A5: Input/Output A5
  14. B6: Input/Output B6
  15. A6: Input/Output A6
  16. B7: Input/Output B7
  17. A7: Input/Output A7
  18. B8: Input/Output B8
  19. A8: Input/Output A8
  20. GND: Ground

Functional Features

The 74F2244SC offers the following functional features:

  • Bidirectional buffering and line driving for eight input/output channels.
  • 3-state outputs allow for high impedance when not actively driving the bus, enabling multiple devices to share a common bus without interference.
  • High-speed operation ensures efficient data transfer in time-critical applications.
  • Low power consumption makes it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages

  • Provides bidirectional buffering and line driving capabilities.
  • Supports 3-state outputs for bus sharing.
  • Offers high-speed operation for time-critical applications.
  • Low power consumption enhances energy efficiency.

Disadvantages

  • Limited number of input/output channels (eight in total).
  • Requires careful consideration of voltage levels to prevent damage or incorrect operation.

Working Principles

The 74F2244SC operates based on the principles of digital logic. It utilizes internal circuitry to amplify and buffer input signals, allowing them to be transmitted to output channels. The bidirectional functionality enables data transmission in both directions, while the 3-state outputs ensure compatibility with shared bus architectures.

Detailed Application Field Plans

The 74F2244SC finds applications in various electronic systems, including but not limited to:

  1. Microprocessor-based systems
  2. Data communication networks
  3. Industrial automation
  4. Automotive electronics
  5. Consumer electronics

In microprocessor-based systems, it can be used for address and data bus buffering. In data communication networks, it facilitates signal level shifting and line driving. In industrial automation and automotive electronics, it aids in interfacing different components. In consumer electronics, it enables efficient signal transmission between various subsystems.

Detailed and Complete Alternative Models

There are several alternative models available that offer similar functionality to the 74F2244SC. Some notable alternatives include:

  1. SN74LS244: Octal buffer/line driver with 3-state outputs.
  2. CD74HCT244: High-speed CMOS octal buffer/line driver.
  3. MC74ACT244: Advanced CMOS octal buffer/line driver.

These alternative models provide comparable features and can be considered based on specific application requirements.

*Word count

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של 74F2244SC בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of 74F2244SC in technical solutions:

  1. Q: What is the 74F2244SC? A: The 74F2244SC is a type of octal buffer/line driver integrated circuit (IC) that can be used in various digital logic applications.

  2. Q: What is the purpose of the 74F2244SC? A: The 74F2244SC is designed to provide buffering and line driving capabilities for digital signals, allowing them to be transmitted over longer distances or connected to multiple devices.

  3. Q: What voltage levels does the 74F2244SC support? A: The 74F2244SC typically supports voltage levels of 5V, making it compatible with many standard TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor) circuits.

  4. Q: How many input/output pins does the 74F2244SC have? A: The 74F2244SC has 8 input pins and 8 output pins, providing a total of 16 pins.

  5. Q: Can the 74F2244SC handle bidirectional communication? A: Yes, the 74F2244SC is capable of bidirectional communication, allowing data to be transmitted in both directions.

  6. Q: What is the maximum operating frequency of the 74F2244SC? A: The maximum operating frequency of the 74F2244SC depends on various factors, but it is typically in the range of tens to hundreds of megahertz (MHz).

  7. Q: Does the 74F2244SC require external power supply decoupling capacitors? A: Yes, it is recommended to use external power supply decoupling capacitors to ensure stable operation and minimize noise.

  8. Q: Can the 74F2244SC be used in high-speed digital data transmission applications? A: Yes, the 74F2244SC can be used in high-speed data transmission applications, but it is important to consider factors such as signal integrity, propagation delay, and skew.

  9. Q: Are there any specific precautions to take when using the 74F2244SC? A: It is important to follow the manufacturer's datasheet and application notes for proper usage, including considerations for voltage levels, current limitations, and thermal management.

  10. Q: Can the 74F2244SC be cascaded or used in conjunction with other ICs? A: Yes, the 74F2244SC can be cascaded or used in conjunction with other ICs to expand the number of input/output channels or perform more complex logic functions.

Please note that these answers are general and may vary depending on the specific application and requirements. Always refer to the manufacturer's documentation for accurate and detailed information.