The 74ACTQ16374MTD belongs to the category of integrated circuits (ICs).
This IC is commonly used in digital electronic systems for data storage and transfer applications.
The 74ACTQ16374MTD is available in a small outline package (SOIC) format.
The essence of this product lies in its ability to store and transfer digital data reliably and efficiently.
The 74ACTQ16374MTD is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.
The 74ACTQ16374MTD has a total of 48 pins, which are assigned as follows:
The 74ACTQ16374MTD offers the following functional features:
The 74ACTQ16374MTD operates based on the principles of digital logic. It utilizes flip-flops to store and transfer data. The clock inputs control the timing of data storage and retrieval, while the output enable inputs determine whether the stored data is accessible at the outputs. The master reset inputs allow synchronous clearing of all flip-flops, enabling a fresh start when necessary.
The 74ACTQ16374MTD finds application in various fields, including but not limited to:
In communication systems, this IC can be used for buffering and transferring data between different components. In data processing units, it aids in temporary data storage during computations. In industrial automation, it facilitates control signal generation and data exchange. In automotive electronics, it contributes to data communication between different vehicle systems. In consumer electronics, it enables efficient data transfer within devices.
These alternative models offer similar functionality with slight variations in specific features, allowing designers to choose the most suitable option for their application requirements.
In conclusion, the 74ACTQ16374MTD is a high-speed, low-power integrated circuit used for data storage and transfer applications. Its robustness, compatibility, and reliability make it a valuable component in various electronic systems across different industries.
Word count: 610
Sure! Here are 10 common questions and answers related to the application of 74ACTQ16374MTD in technical solutions:
Question: What is the 74ACTQ16374MTD?
Answer: The 74ACTQ16374MTD is a 16-bit D-type flip-flop with 3-state outputs, designed for high-speed digital applications.
Question: What is the operating voltage range of the 74ACTQ16374MTD?
Answer: The operating voltage range is typically between 4.5V and 5.5V.
Question: What is the maximum clock frequency supported by the 74ACTQ16374MTD?
Answer: The maximum clock frequency is typically around 250 MHz.
Question: Can the 74ACTQ16374MTD be used in both parallel and serial data transfer applications?
Answer: Yes, the 74ACTQ16374MTD can be used in both parallel and serial data transfer applications.
Question: What is the output drive capability of the 74ACTQ16374MTD?
Answer: The 74ACTQ16374MTD has a typical output drive capability of ±24mA.
Question: Does the 74ACTQ16374MTD have internal pull-up or pull-down resistors?
Answer: No, the 74ACTQ16374MTD does not have internal pull-up or pull-down resistors.
Question: Can the 74ACTQ16374MTD be cascaded to create larger registers?
Answer: Yes, multiple 74ACTQ16374MTD flip-flops can be cascaded to create larger registers.
Question: What is the power consumption of the 74ACTQ16374MTD?
Answer: The power consumption of the 74ACTQ16374MTD is typically low, making it suitable for battery-powered applications.
Question: Does the 74ACTQ16374MTD have any built-in protection features?
Answer: Yes, the 74ACTQ16374MTD has built-in ESD protection to prevent damage from electrostatic discharge.
Question: What are some typical applications of the 74ACTQ16374MTD?
Answer: The 74ACTQ16374MTD is commonly used in data storage, address latching, and bus interface applications in various electronic systems.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.