ON Semiconductor
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
2N5460_D74Z
צפה בפרטים DataSheets

2N5460_D74Z

Product Overview

Category

The 2N5460_D74Z belongs to the category of field-effect transistors (FETs).

Use

It is commonly used as an amplifier or switch in electronic circuits.

Characteristics

  • Low power consumption
  • High input impedance
  • Good linearity
  • Small package size

Package

The 2N5460_D74Z is typically available in a TO-92 package.

Essence

This FET is essential for amplifying and switching signals in various electronic applications.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Drain-Source Voltage (Vds): 40V
  • Gate-Source Voltage (Vgs): ±20V
  • Drain Current (Id): 600mA
  • Power Dissipation (Pd): 350mW
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The 2N5460_D74Z has three pins: 1. Source (S) 2. Gate (G) 3. Drain (D)

Functional Features

  • High input impedance allows for easy interfacing with other circuit components.
  • Low power consumption makes it suitable for battery-operated devices.
  • Good linearity ensures accurate signal amplification.

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High input impedance
  • Small package size

Disadvantages

  • Limited maximum drain current compared to some other FETs
  • Moderate voltage ratings

Working Principles

The 2N5460_D74Z operates based on the modulation of the conductivity of a channel by an electric field. When a voltage is applied to the gate terminal, it controls the flow of current between the source and drain terminals.

Detailed Application Field Plans

The 2N5460_D74Z is widely used in audio amplifiers, analog switches, and sensor interfaces due to its low noise and high input impedance. It is also employed in low-power switching applications.

Detailed and Complete Alternative Models

Some alternative models to the 2N5460_D74Z include the J176, J175, and 2N7000 FETs. These alternatives offer similar characteristics and can be used interchangeably in many applications.

In conclusion, the 2N5460_D74Z is a versatile field-effect transistor with a range of applications in electronic circuits, offering a balance of performance and efficiency.

[Word count: 346]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של 2N5460_D74Z בפתרונות טכניים

  1. What is the 2N5460_D74Z transistor used for?

    • The 2N5460_D74Z is a P-channel JFET transistor commonly used in low-power amplifier and switching applications.

  2. What are the key specifications of the 2N5460_D74Z transistor?

    • The 2N5460_D74Z has a maximum drain-source voltage of -40V, a maximum gate-source voltage of -40V, and a maximum continuous drain current of -10mA.

  3. How do I identify the pinout of the 2N5460_D74Z transistor?

    • The pinout of the 2N5460_D74Z transistor is typically identified as the source (S), gate (G), and drain (D) pins.

  4. Can the 2N5460_D74Z be used in audio amplifier circuits?

    • Yes, the 2N5460_D74Z can be used in audio amplifier circuits, particularly in low-power applications.

  5. What are some common applications of the 2N5460_D74Z in technical solutions?

    • The 2N5460_D74Z is commonly used in signal amplification, analog switches, and voltage-controlled resistors.

  6. What are the typical operating conditions for the 2N5460_D74Z transistor?

    • The 2N5460_D74Z operates within a temperature range of -55°C to 150°C and is suitable for low-power applications.

  7. Is the 2N5460_D74Z suitable for high-frequency applications?

    • The 2N5460_D74Z is not typically recommended for high-frequency applications due to its relatively low cutoff frequency.

  8. What are the important considerations when designing with the 2N5460_D74Z transistor?

    • Designers should consider the maximum ratings, biasing requirements, and input/output impedance matching when using the 2N5460_D74Z in circuits.

  9. Can the 2N5460_D74Z be used in battery-powered devices?

    • Yes, the 2N5460_D74Z's low power consumption and voltage ratings make it suitable for use in battery-powered devices.

  10. Where can I find detailed datasheets and application notes for the 2N5460_D74Z transistor?

    • Detailed datasheets and application notes for the 2N5460_D74Z can be found on semiconductor manufacturer websites or electronic component distributor platforms.