ON Semiconductor
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
2N5400RA
צפה בפרטים DataSheets

2N5400RA

Product Overview

Category:

The 2N5400RA is a general-purpose PNP transistor used in various electronic applications.

Use:

It is commonly used for amplification, switching, and regulation of electrical signals in electronic circuits.

Characteristics:

  • Low power dissipation
  • High current gain
  • Low noise
  • High voltage capability

Package:

The 2N5400RA is typically available in a TO-92 package, which is a small, through-hole transistor package.

Essence:

This transistor is essential for designing and building electronic circuits that require PNP transistors for signal processing and control.

Packaging/Quantity:

The 2N5400RA is usually sold in reels or tubes containing multiple units, with quantities varying based on the supplier.

Specifications

  • Collector-Emitter Voltage (VCEO): 150V
  • Collector-Base Voltage (VCBO): 160V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 600mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (fT): 300MHz
  • Operating Temperature: -55°C to 150°C

Detailed Pin Configuration

The 2N5400RA transistor has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • High current gain allows for small base current to control larger collector current.
  • Low noise makes it suitable for audio amplifier applications.
  • High voltage capability enables use in various power supply and switching circuits.

Advantages and Disadvantages

Advantages

  • Versatile use in amplification and switching applications.
  • Low power dissipation.
  • High voltage capability.

Disadvantages

  • Relatively low maximum collector current compared to some other transistors.
  • Limited frequency response for high-speed applications.

Working Principles

The 2N5400RA operates as a current-controlled switch or amplifier. When a small current flows into the base terminal, it controls a much larger current flowing between the collector and emitter terminals, allowing for signal amplification or switching.

Detailed Application Field Plans

The 2N5400RA is commonly used in the following applications: - Audio amplifiers - Signal amplification circuits - Switching circuits - Voltage regulators

Detailed and Complete Alternative Models

Some alternative models to the 2N5400RA include: - BC557 - 2N3906 - 2N2907

In conclusion, the 2N5400RA is a versatile PNP transistor with various applications in electronic circuits, offering advantages such as low power dissipation, high voltage capability, and low noise. However, it also has limitations in terms of maximum collector current and frequency response. Understanding its specifications, pin configuration, functional features, and alternative models is crucial for effective utilization in electronic designs.

[Word count: 411]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של 2N5400RA בפתרונות טכניים

  1. What is the 2N5400RA transistor used for?

    • The 2N5400RA is a general-purpose PNP bipolar junction transistor commonly used in amplification and switching applications.

  2. What are the key specifications of the 2N5400RA transistor?

    • The 2N5400RA has a maximum collector current of 600mA, a maximum collector-emitter voltage of 150V, and a DC current gain (hFE) ranging from 300 to 900.

  3. How can I identify the pinout of the 2N5400RA transistor?

    • The pinout of the 2N5400RA transistor is typically Emitter-Base-Collector (EBC), with the flat side facing towards you and the pins down, the left pin is the emitter, the middle pin is the base, and the right pin is the collector.

  4. What are some common circuit configurations using the 2N5400RA transistor?

    • Common circuit configurations include common emitter amplifiers, switch circuits, and signal amplification in audio applications.

  5. What are the typical operating conditions for the 2N5400RA transistor?

    • The 2N5400RA transistor is typically operated within a temperature range of -55°C to 150°C and is suitable for low-power applications.

  6. Can the 2N5400RA be used for high-frequency applications?

    • While the 2N5400RA can be used for moderate frequency applications, it is not typically recommended for high-frequency designs due to its transition frequency limitations.

  7. What are some alternative transistors that can be used in place of the 2N5400RA?

    • Alternatives include the 2N3906, BC557, and BC327, which are also PNP transistors with similar characteristics.

  8. How do I calculate the biasing resistors for the 2N5400RA in an amplifier circuit?

    • Biasing resistors can be calculated using the desired operating point, the transistor's hFE, and the supply voltage to establish the appropriate quiescent point.

  9. What are the typical applications where the 2N5400RA is not recommended?

    • The 2N5400RA is not recommended for high-power applications or those requiring high-frequency performance.

  10. Are there any special considerations for handling and mounting the 2N5400RA transistor?

    • It is important to handle the transistor with care to avoid damaging the leads, and proper heat sinking should be considered when operating at higher currents or temperatures.