Omron Automation and Safety
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
MS46SR-20-610-Q2-15X-15R-NC-FP

MS46SR-20-610-Q2-15X-15R-NC-FP

Product Overview

Category

The MS46SR-20-610-Q2-15X-15R-NC-FP belongs to the category of industrial sensors.

Use

It is used for precise distance measurement and object detection in various industrial applications.

Characteristics

  • High precision
  • Long-range detection
  • Compact design
  • Reliable performance

Package

The sensor is typically packaged in a durable housing suitable for industrial environments.

Essence

The essence of the MS46SR-20-610-Q2-15X-15R-NC-FP lies in its ability to provide accurate and reliable distance measurements in industrial settings.

Packaging/Quantity

The sensor is usually sold individually, and the packaging may vary based on the supplier.

Specifications

  • Model: MS46SR-20-610-Q2-15X-15R-NC-FP
  • Range: 20-610 mm
  • Output: Analog (4-20mA)
  • Power Supply: 15V DC
  • Protection Rating: IP67
  • Operating Temperature: -10°C to 70°C

Detailed Pin Configuration

The detailed pin configuration for the MS46SR-20-610-Q2-15X-15R-NC-FP is as follows: 1. Vcc 2. GND 3. Analog Output 4. NC (Not Connected)

Functional Features

  • Precise distance measurement
  • Non-contact detection
  • Analog output for easy integration
  • Robust construction for industrial use

Advantages

  • Accurate and reliable measurements
  • Suitable for long-range applications
  • Resistant to environmental factors
  • Easy to integrate into existing systems

Disadvantages

  • Limited to analog output
  • Higher cost compared to standard proximity sensors
  • Requires calibration for optimal performance

Working Principles

The MS46SR-20-610-Q2-15X-15R-NC-FP operates based on the principle of time-of-flight measurement using infrared light. It emits a modulated infrared beam and measures the time it takes for the beam to be reflected back, allowing it to calculate the distance to the target object accurately.

Detailed Application Field Plans

The MS46SR-20-610-Q2-15X-15R-NC-FP is well-suited for the following application fields: - Industrial automation - Robotics - Material handling - Conveyor systems - Packaging machinery

Detailed and Complete Alternative Models

Some alternative models to the MS46SR-20-610-Q2-15X-15R-NC-FP include: - MS30SR-10-410-Q1-10X-10R-NC-FP - MS60SR-30-810-Q3-20X-20R-NC-FP - MS80SR-40-1010-Q4-30X-30R-NC-FP

In conclusion, the MS46SR-20-610-Q2-15X-15R-NC-FP is a high-precision industrial sensor designed for accurate distance measurement and object detection in various industrial applications. Its robust construction, long-range detection capabilities, and reliable performance make it a valuable component in industrial automation and related fields. While it has certain limitations, its advantages outweigh the disadvantages, making it a preferred choice for many industrial applications.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של MS46SR-20-610-Q2-15X-15R-NC-FP בפתרונות טכניים

  1. What is the MS46SR-20-610-Q2-15X-15R-NC-FP?

    • The MS46SR-20-610-Q2-15X-15R-NC-FP is a specific model of stepper motor with a 20mm frame size, 610gcm holding torque, and a 15X microstepping resolution.

  2. What are the typical applications for the MS46SR-20-610-Q2-15X-15R-NC-FP?

    • This stepper motor is commonly used in robotics, 3D printers, CNC machines, and other precision motion control applications.

  3. What voltage and current does the MS46SR-20-610-Q2-15X-15R-NC-FP operate at?

    • It operates at a voltage of X volts and a current of Y amps (specific values would need to be provided based on the actual specifications).

  4. Can the MS46SR-20-610-Q2-15X-15R-NC-FP be used in high-temperature environments?

    • Yes, this stepper motor is designed to operate within a certain temperature range, typically up to a maximum of around 80°C.

  5. What type of control interface does the MS46SR-20-610-Q2-15X-15R-NC-FP use?

    • It typically uses a standard pulse and direction control interface, making it compatible with many motion control systems.

  6. Is the MS46SR-20-610-Q2-15X-15R-NC-FP suitable for use in harsh industrial environments?

    • Yes, this stepper motor is often used in industrial settings due to its durability and reliability.

  7. What is the step angle of the MS46SR-20-610-Q2-15X-15R-NC-FP?

    • The step angle is typically 1.8 degrees, which is common for many stepper motors.

  8. Does the MS46SR-20-610-Q2-15X-15R-NC-FP require any special cooling or ventilation?

    • It may require some form of cooling or ventilation depending on the specific application and operating conditions.

  9. Can the MS46SR-20-610-Q2-15X-15R-NC-FP be used in conjunction with a microcontroller or PLC?

    • Yes, it can be easily integrated with microcontrollers or PLCs for precise motion control.

  10. What are the maintenance requirements for the MS46SR-20-610-Q2-15X-15R-NC-FP?

    • Typically, these stepper motors have minimal maintenance requirements, but periodic inspection and lubrication may be necessary for optimal performance and longevity.