The 74ALVT16374DGG,512 is a 16-bit D-type flip-flop with 3-state outputs. It operates on a supply voltage range of 2.7V to 3.6V and has a typical propagation delay of 4.5 ns. The device features non-inverting outputs and provides high noise immunity. It is compatible with TTL input and output levels.
The IC has a total of 48 pins arranged in a TSSOP package. The pin configuration is as follows:
The 74ALVT16374DGG,512 is designed to store and transmit digital signals. It features 16 D-type flip-flops with 3-state outputs. The device can be enabled or disabled using the Output Enable (OE) pin. When enabled, the data at the inputs (D0-D15) is transferred to the corresponding outputs (Q0-Q15) on the rising edge of the clock signal (CLK). The Master Reset (MR) pin allows resetting all flip-flops to a predefined state.
Advantages: - High-speed operation - Low-power consumption - 3-state outputs for bus-oriented applications - TTL compatible input and output levels - High noise immunity
Disadvantages: - Limited voltage supply range (2.7V to 3.6V) - TSSOP package may require careful handling during assembly
The 74ALVT16374DGG,512 operates based on the principles of D-type flip-flops. Each
Sure! Here are 10 common questions and answers related to the application of 74ALVT16374DGG,512:
Q: What is the 74ALVT16374DGG,512? A: The 74ALVT16374DGG,512 is a 16-bit D-type flip-flop with 3-state outputs, designed for low-voltage operation.
Q: What is the voltage range supported by 74ALVT16374DGG,512? A: The 74ALVT16374DGG,512 supports a voltage range of 1.65V to 3.6V.
Q: What is the maximum clock frequency supported by 74ALVT16374DGG,512? A: The maximum clock frequency supported by 74ALVT16374DGG,512 is typically around 200 MHz.
Q: How many flip-flops are there in 74ALVT16374DGG,512? A: 74ALVT16374DGG,512 consists of 16 individual D-type flip-flops.
Q: What are the 3-state outputs in 74ALVT16374DGG,512 used for? A: The 3-state outputs allow multiple devices to share a common bus without interfering with each other.
Q: Can I use 74ALVT16374DGG,512 in both synchronous and asynchronous applications? A: Yes, 74ALVT16374DGG,512 can be used in both synchronous and asynchronous applications.
Q: What is the power supply voltage required for 74ALVT16374DGG,512? A: The power supply voltage required for 74ALVT16374DGG,512 is typically 2.5V.
Q: What is the typical propagation delay of 74ALVT16374DGG,512? A: The typical propagation delay of 74ALVT16374DGG,512 is around 3.5 ns.
Q: Can I use 74ALVT16374DGG,512 in high-speed data transfer applications? A: Yes, 74ALVT16374DGG,512 is suitable for high-speed data transfer applications due to its low propagation delay.
Q: Are there any special considerations for PCB layout when using 74ALVT16374DGG,512? A: It is recommended to follow proper PCB layout guidelines to minimize noise and ensure signal integrity when using 74ALVT16374DGG,512.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.