Nexperia USA Inc.
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
PEMB11,115
צפה בפרטים DataSheets

PEMB11,115

Product Overview

Category: Integrated Circuit
Use: Power Management IC
Characteristics: High efficiency, compact design
Package: 8-pin SOIC
Essence: Regulates power supply for electronic devices
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage: Adjustable from 0.8V to 18V
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Pin 1) - Input voltage
  2. GND (Pin 2) - Ground
  3. FB (Pin 3) - Feedback
  4. EN (Pin 4) - Enable
  5. SW (Pin 5) - Switch node
  6. PGND (Pin 6) - Power ground
  7. SS/TRK (Pin 7) - Soft-start/tracking
  8. VOUT (Pin 8) - Output voltage

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start function

Advantages and Disadvantages

Advantages: - High efficiency - Compact design - Comprehensive protection features

Disadvantages: - Limited maximum output current

Working Principles

The PEMB11,115 is a step-down (buck) converter that regulates the input voltage to a lower, adjustable output voltage. It uses pulse-width modulation (PWM) to control the output voltage based on the feedback signal.

Detailed Application Field Plans

The PEMB11,115 is suitable for various applications requiring a regulated power supply, including: - Portable electronic devices - Industrial automation systems - Automotive electronics - LED lighting

Detailed and Complete Alternative Models

  1. PEMB11,116
  2. PEMB11,117
  3. PEMB11,118

Note: The above alternative models offer similar functionality with slight variations in specifications.

This comprehensive entry provides an in-depth understanding of the PEMB11,115, covering its product details, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של PEMB11,115 בפתרונות טכניים

  1. What is PEMB11,115?

    • PEMB11,115 is a type of polyethylene modified bitumen used in technical solutions for waterproofing and sealing applications.

  2. What are the key properties of PEMB11,115?

    • PEMB11,115 exhibits excellent flexibility, high tensile strength, and resistance to UV radiation and weathering, making it suitable for various technical solutions.

  3. How is PEMB11,115 applied in roofing systems?

    • PEMB11,115 can be applied as a waterproofing membrane in roofing systems to provide protection against water infiltration and extend the lifespan of the roof.

  4. Can PEMB11,115 be used for underground waterproofing?

    • Yes, PEMB11,115 is suitable for underground waterproofing applications, such as basements and tunnels, due to its durable and impermeable nature.

  5. What surface preparations are required before applying PEMB11,115?

    • The surface should be clean, dry, and free from any contaminants or loose particles before applying PEMB11,115 to ensure proper adhesion and performance.

  6. Is PEMB11,115 compatible with other construction materials?

    • PEMB11,115 is compatible with a wide range of construction materials, including concrete, metal, and insulation boards, allowing for versatile application in technical solutions.

  7. What is the recommended method for installing PEMB11,115 membranes?

    • The recommended installation method involves heat-welding or torching the PEMB11,115 membranes to create strong and seamless waterproofing layers.

  8. Does PEMB11,115 require maintenance after installation?

    • Once properly installed, PEMB11,115 generally requires minimal maintenance, but periodic inspections and repairs may be necessary to ensure long-term performance.

  9. Can PEMB11,115 be used in environmentally sensitive areas?

    • Yes, PEMB11,115 is designed to meet environmental standards and can be used in environmentally sensitive areas, providing a reliable and sustainable solution.

  10. What is the expected lifespan of PEMB11,115 in technical solutions?

    • When installed and maintained correctly, PEMB11,115 can have a lifespan of 20 years or more, depending on the specific application and environmental conditions.