Nexperia USA Inc.
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
PDTC123JMB,315
צפה בפרטים DataSheets

PDTC123JMB,315

Product Overview

Category

The PDTC123JMB,315 belongs to the category of semiconductor devices.

Use

It is commonly used in electronic circuits for various applications.

Characteristics

  • Small form factor
  • Low power consumption
  • High reliability

Package

The PDTC123JMB,315 is typically available in a surface-mount package.

Essence

This product serves as a key component in electronic circuit design and implementation.

Packaging/Quantity

It is usually supplied in reels or tubes with varying quantities based on manufacturer specifications.

Specifications

  • Type: NPN Transistor
  • Maximum Collector-Base Voltage: 50V
  • Maximum Collector Current: 100mA
  • Power Dissipation: 200mW
  • Transition Frequency: 250MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The PDTC123JMB,315 typically has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • Amplification of weak signals
  • Switching applications in electronic circuits
  • Reliable performance in low-power designs

Advantages

  • Small footprint
  • Suitable for high-frequency applications
  • Low power consumption

Disadvantages

  • Limited maximum collector current
  • Restricted operating temperature range

Working Principles

The PDTC123JMB,315 operates based on the principles of bipolar junction transistors, where the flow of current is controlled by the application of a small signal at the base terminal.

Detailed Application Field Plans

This transistor is widely used in: - Audio amplifiers - Signal processing circuits - Oscillator circuits - Switching circuits

Detailed and Complete Alternative Models

  • BC547
  • 2N2222
  • 2N3904
  • S8050

In conclusion, the PDTC123JMB,315 is a versatile NPN transistor with a small form factor and reliable performance, making it suitable for a wide range of electronic applications.

[Word Count: 274]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של PDTC123JMB,315 בפתרונות טכניים

Sure, here are 10 common questions and answers related to the application of PDTC123JMB,315 in technical solutions:

  1. What is the maximum voltage rating for PDTC123JMB,315?

    • The maximum voltage rating for PDTC123JMB,315 is 50V.

  2. What is the typical collector current for PDTC123JMB,315?

    • The typical collector current for PDTC123JMB,315 is 100mA.

  3. What is the power dissipation of PDTC123JMB,315?

    • The power dissipation of PDTC123JMB,315 is 250mW.

  4. What is the gain (hFE) of PDTC123JMB,315?

    • The gain (hFE) of PDTC123JMB,315 is typically around 100-300.

  5. What are the typical applications for PDTC123JMB,315?

    • PDTC123JMB,315 is commonly used in switching and amplification applications in various electronic circuits.

  6. Is PDTC123JMB,315 suitable for low-power applications?

    • Yes, PDTC123JMB,315 is suitable for low-power applications due to its low power dissipation and moderate current handling capabilities.

  7. Does PDTC123JMB,315 require a heat sink for operation?

    • In most cases, PDTC123JMB,315 does not require a heat sink for normal operation due to its moderate power dissipation.

  8. What are the temperature specifications for PDTC123JMB,315?

    • PDTC123JMB,315 has an operating temperature range of -55°C to 150°C.

  9. Can PDTC123JMB,315 be used in high-frequency applications?

    • While PDTC123JMB,315 is not specifically designed for high-frequency applications, it can be used in moderate frequency circuits with proper design considerations.

  10. Are there any specific layout considerations when using PDTC123JMB,315 in a circuit?

    • It is recommended to keep the traces short and minimize parasitic capacitance when designing a circuit with PDTC123JMB,315 to ensure optimal performance.

I hope these answers provide the information you were looking for! If you have any more questions, feel free to ask.