BC856BS,135
Product Category: Transistor
Basic Information Overview: - Category: Bipolar Transistor - Use: Amplification and switching of electronic signals - Characteristics: Small signal NPN transistor, low power, high current gain - Package: SOT-23 - Essence: Silicon - Packaging/Quantity: Tape and Reel, 3000 pieces per reel
Specifications: - Collector-Base Voltage (VCBO): 80V - Collector-Emitter Voltage (VCEO): 65V - Emitter-Base Voltage (VEBO): 5V - Collector Current (IC): 100mA - Power Dissipation (Ptot): 250mW - Transition Frequency (fT): 150MHz - Operating Temperature Range: -55°C to +150°C
Detailed Pin Configuration: The BC856BS,135 transistor has three pins: the emitter (E), base (B), and collector (C).
Functional Features: - High current gain - Low noise - Small package size - Suitable for high-density surface mount applications
Advantages: - Low power consumption - High current gain - Wide operating temperature range
Disadvantages: - Limited power dissipation capability - Relatively low collector current rating
Working Principles: The BC856BS,135 operates based on the principles of bipolar junction transistors, utilizing the control of current flow between its layers to amplify or switch electronic signals.
Detailed Application Field Plans: - Audio amplification circuits - Signal amplification in sensor applications - Switching applications in electronic control systems
Detailed and Complete Alternative Models: - BC846BS,135 - BC847BS,135 - BC848BS,135 - BC850BS,135
This comprehensive entry provides a detailed overview of the BC856BS,135 transistor, covering its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של BC856BS,135 בפתרונות טכניים
What is the BC856BS,135 transistor used for?
- The BC856BS,135 is a general-purpose PNP transistor commonly used in amplification and switching applications.
What are the key specifications of the BC856BS,135 transistor?
- The BC856BS,135 has a maximum collector current of 100mA, a maximum collector-base voltage of 45V, and a maximum power dissipation of 200mW.
Can the BC856BS,135 be used for audio amplification?
- Yes, the BC856BS,135 can be used for small-signal audio amplification due to its low noise and high gain characteristics.
Is the BC856BS,135 suitable for switching applications?
- Yes, the BC856BS,135 is commonly used in low-power switching circuits due to its fast switching speed and low saturation voltage.
What are the typical operating conditions for the BC856BS,135?
- The BC856BS,135 operates well within a temperature range of -55°C to 150°C and is typically used with a base current of 5mA.
Can the BC856BS,135 be used in low-voltage applications?
- Yes, the BC856BS,135 is suitable for low-voltage applications due to its low collector-base voltage and low saturation voltage.
Does the BC856BS,135 require any special heat sinking or thermal considerations?
- For most common applications, the BC856BS,135 does not require special heat sinking or thermal considerations due to its low power dissipation.
Are there any common alternative transistors that can be used in place of the BC856BS,135?
- Some common alternatives to the BC856BS,135 include the BC807, 2N3906, and 2N4403 transistors, which have similar characteristics.
What are the typical circuit configurations where the BC856BS,135 is used?
- The BC856BS,135 is commonly used in common-emitter and common-collector amplifier configurations, as well as in various switching circuits.
Where can I find detailed application notes and reference designs for using the BC856BS,135 in technical solutions?
- Detailed application notes and reference designs for the BC856BS,135 can be found in the datasheet provided by the manufacturer, as well as in various electronics engineering resources and forums.