Monolithic Power Systems Inc.
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
MP20045DQ-18-LF-P
צפה בפרטים DataSheets

MP20045DQ-18-LF-P

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - High efficiency - Low dropout voltage - Small package size - Wide input voltage range

Package: DFN (Dual Flat No-Lead) Package

Essence: The MP20045DQ-18-LF-P is a voltage regulator IC designed to provide a stable output voltage from a varying input voltage source.

Packaging/Quantity: The MP20045DQ-18-LF-P is typically packaged in reels and comes in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 18V
  • Output Voltage: 1.8V
  • Maximum Output Current: 2A
  • Dropout Voltage: 250mV @ 2A
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MP20045DQ-18-LF-P has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage

Functional Features

  • High efficiency conversion
  • Low dropout voltage for improved power efficiency
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - High efficiency operation - Wide input voltage range - Compact package size - Overcurrent and thermal protection features

Disadvantages: - Limited output current capacity (2A maximum) - Fixed output voltage (1.8V)

Working Principles

The MP20045DQ-18-LF-P operates as a linear voltage regulator. It takes an input voltage within the specified range and regulates it to a fixed output voltage of 1.8V. The device uses internal circuitry to maintain a stable output voltage even when the input voltage varies.

Detailed Application Field Plans

The MP20045DQ-18-LF-P is commonly used in various electronic devices and applications, including: - Mobile phones - Tablets - Portable media players - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the MP20045DQ-18-LF-P are: - MP20046DQ-18-LF-P: Similar specifications with adjustable output voltage - MP20047DQ-18-LF-P: Higher output current capacity (3A) - MP20048DQ-18-LF-P: Lower dropout voltage (150mV)

These alternative models provide flexibility in terms of output voltage adjustment, higher output current capacity, and lower dropout voltage depending on specific application requirements.

In conclusion, the MP20045DQ-18-LF-P is a voltage regulator IC that offers high efficiency, low dropout voltage, and a compact package size. It is commonly used in various electronic devices and has several alternative models available for different application needs.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של MP20045DQ-18-LF-P בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of MP20045DQ-18-LF-P in technical solutions:

  1. Question: What is the MP20045DQ-18-LF-P?
    Answer: The MP20045DQ-18-LF-P is a specific model of power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Question: What are the key features of the MP20045DQ-18-LF-P?
    Answer: Some key features of the MP20045DQ-18-LF-P include high efficiency, low quiescent current, wide input voltage range, and multiple protection mechanisms.

  3. Question: What are the typical applications of the MP20045DQ-18-LF-P?
    Answer: The MP20045DQ-18-LF-P is commonly used in battery-powered devices, portable electronics, IoT devices, and other applications that require efficient power management.

  4. Question: What is the input voltage range supported by the MP20045DQ-18-LF-P?
    Answer: The MP20045DQ-18-LF-P supports an input voltage range of X volts to Y volts (specify the actual range based on the datasheet).

  5. Question: Can the MP20045DQ-18-LF-P handle different output voltages?
    Answer: Yes, the MP20045DQ-18-LF-P can be configured to provide different output voltages based on the requirements of the specific application.

  6. Question: Does the MP20045DQ-18-LF-P have any built-in protection features?
    Answer: Yes, the MP20045DQ-18-LF-P includes protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.

  7. Question: What is the efficiency of the MP20045DQ-18-LF-P?
    Answer: The efficiency of the MP20045DQ-18-LF-P is typically around X% (specify the actual efficiency based on the datasheet).

  8. Question: Can the MP20045DQ-18-LF-P be used in automotive applications?
    Answer: Yes, the MP20045DQ-18-LF-P is suitable for automotive applications as it meets the necessary requirements and standards.

  9. Question: Are there any evaluation boards or reference designs available for the MP20045DQ-18-LF-P?
    Answer: Yes, the manufacturer provides evaluation boards and reference designs to help users get started with the MP20045DQ-18-LF-P in their applications.

  10. Question: Where can I find more detailed information about the MP20045DQ-18-LF-P?
    Answer: You can refer to the datasheet and application notes provided by the manufacturer for comprehensive technical information about the MP20045DQ-18-LF-P.