Microsemi Corporation
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
MSMBJ17AE3
צפה בפרטים DataSheets

MSMBJ17AE3

Product Overview

Category

The MSMBJ17AE3 belongs to the category of transient voltage suppressor (TVS) diodes.

Use

It is used to protect sensitive electronic components from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events.

Characteristics

  • Fast response time
  • Low clamping voltage
  • High surge current capability

Package

The MSMBJ17AE3 is available in a surface mount package.

Essence

The essence of the MSMBJ17AE3 lies in its ability to provide robust protection against transient voltage events.

Packaging/Quantity

The MSMBJ17AE3 is typically packaged in reels and is available in varying quantities depending on the manufacturer's specifications.

Specifications

  • Standoff Voltage: 15V
  • Breakdown Voltage: 16.7V
  • Maximum Clamping Voltage: 25.2V
  • Peak Pulse Current: 10A
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The MSMBJ17AE3 typically has two pins for surface mount installation. The pin configuration may vary based on the specific manufacturer's datasheet.

Functional Features

  • Bi-directional TVS diode
  • Low leakage current
  • High reliability

Advantages and Disadvantages

Advantages

  • Effective protection against transient voltage events
  • Fast response time
  • Wide operating temperature range

Disadvantages

  • Limited peak pulse current compared to higher-rated TVS diodes
  • Sensitive to reverse bias conditions

Working Principles

The MSMBJ17AE3 operates by diverting excessive transient current away from sensitive electronic components, thereby limiting the voltage across the protected circuit.

Detailed Application Field Plans

The MSMBJ17AE3 is commonly used in various applications including: - Consumer electronics - Telecommunication equipment - Industrial automation systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the MSMBJ17AE3 include: - SMAJ15A: Similar voltage rating and package type - P6SMB15A: Higher peak pulse current rating - SMBJ15A: Lower profile package design

In conclusion, the MSMBJ17AE3 transient voltage suppressor diode offers effective protection against transient voltage events with its fast response time and low clamping voltage. While it has certain limitations, it is widely used in diverse electronic applications and has several alternative models available in the market.

[Word count: 366]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של MSMBJ17AE3 בפתרונות טכניים

Sure, here are 10 common questions and answers related to the application of MSMBJ17AE3 in technical solutions:

  1. Q: What is the maximum power dissipation of MSMBJ17AE3? A: The maximum power dissipation of MSMBJ17AE3 is 1500W.

  2. Q: What is the peak pulse current of MSMBJ17AE3? A: The peak pulse current of MSMBJ17AE3 is 30A.

  3. Q: What is the breakdown voltage of MSMBJ17AE3? A: The breakdown voltage of MSMBJ17AE3 is 17V.

  4. Q: What is the operating temperature range for MSMBJ17AE3? A: The operating temperature range for MSMBJ17AE3 is -55°C to +150°C.

  5. Q: Can MSMBJ17AE3 be used for overvoltage protection in electronic circuits? A: Yes, MSMBJ17AE3 is commonly used for overvoltage protection in electronic circuits.

  6. Q: Is MSMBJ17AE3 suitable for surge suppression in power supply units? A: Yes, MSMBJ17AE3 is suitable for surge suppression in power supply units.

  7. Q: What is the response time of MSMBJ17AE3 in clamping transient voltage spikes? A: The response time of MSMBJ17AE3 is typically less than 1 nanosecond.

  8. Q: Can MSMBJ17AE3 be used in telecommunications equipment for lightning protection? A: Yes, MSMBJ17AE3 is often used in telecommunications equipment for lightning protection.

  9. Q: Does MSMBJ17AE3 meet industry standards for ESD protection? A: Yes, MSMBJ17AE3 meets industry standards for ESD protection.

  10. Q: Are there any specific layout considerations when using MSMBJ17AE3 in a PCB design? A: It is recommended to follow the manufacturer's guidelines for PCB layout and keep traces short and direct to minimize inductance.

These questions and answers cover various aspects of the application of MSMBJ17AE3 in technical solutions. If you have more specific questions, feel free to ask!