התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
MT29F2G08ABBEAH4-IT:E

MT29F2G08ABBEAH4-IT:E

Product Overview

Category

MT29F2G08ABBEAH4-IT:E belongs to the category of NAND Flash Memory.

Use

This product is primarily used for data storage in various electronic devices such as smartphones, tablets, digital cameras, and solid-state drives (SSDs).

Characteristics

  • High storage capacity: MT29F2G08ABBEAH4-IT:E offers a storage capacity of 2 gigabytes (GB).
  • Fast data transfer rate: It provides high-speed data transfer, allowing for quick access to stored information.
  • Reliable performance: This NAND flash memory ensures reliable and consistent performance over an extended period.
  • Low power consumption: It is designed to consume minimal power, making it suitable for battery-powered devices.
  • Compact package: The product comes in a small form factor, enabling easy integration into various electronic devices.

Package and Quantity

MT29F2G08ABBEAH4-IT:E is available in a surface-mount TSOP (Thin Small Outline Package) with 48 pins. It is typically sold in reels containing multiple units.

Specifications

  • Manufacturer: Micron Technology Inc.
  • Part Number: MT29F2G08ABBEAH4-IT:E
  • Memory Type: NAND Flash
  • Storage Capacity: 2 GB
  • Interface: Parallel
  • Supply Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: TSOP
  • Pin Count: 48

Detailed Pin Configuration

The pin configuration of MT29F2G08ABBEAH4-IT:E is as follows:

  1. ALE (Address Latch Enable)
  2. CLE (Command Latch Enable)
  3. CE# (Chip Enable)
  4. RE# (Read Enable)
  5. WE# (Write Enable)
  6. R/B# (Ready/Busy)
  7. VCC (Power Supply)
  8. GND (Ground)
  9. NC (No Connection)
  10. DQ0-DQ7 (Data Input/Output)

(Note: The remaining pins are not listed here for brevity.)

Functional Features

  • Page Read/Program/Erase Operations: MT29F2G08ABBEAH4-IT:E supports efficient read, program, and erase operations at the page level.
  • Block Management: It incorporates advanced block management algorithms to optimize performance and extend the lifespan of the memory.
  • Error Correction Code (ECC): This NAND flash memory utilizes ECC techniques to detect and correct errors, ensuring data integrity.
  • Wear-Leveling: The product employs wear-leveling algorithms to distribute write operations evenly across the memory cells, preventing premature wear-out.

Advantages and Disadvantages

Advantages

  • High storage capacity allows for ample data storage.
  • Fast data transfer rate enables quick access to stored information.
  • Reliable performance ensures consistent operation over time.
  • Low power consumption prolongs battery life in portable devices.
  • Compact package facilitates easy integration into various electronic devices.

Disadvantages

  • Limited endurance: Like all NAND flash memories, MT29F2G08ABBEAH4-IT:E has a finite number of program/erase cycles before it may become unreliable.
  • Cost: NAND flash memory tends to be more expensive compared to other types of non-volatile memory.

Working Principles

MT29F2G08ABBEAH4-IT:E operates based on the principles of NAND flash memory technology. It stores data by trapping electric charges within floating-gate transistors. These charges represent binary information (0s and 1s). The presence or absence of charges determines the stored data.

During read operations, the memory controller applies appropriate voltages to the selected memory cells and measures the resulting current flow. This allows it to determine the stored data.

During program and erase operations, specific voltages are applied to modify the charge levels within the floating gates, effectively programming or erasing the memory cells.

Detailed Application Field Plans

MT29F2G08ABBEAH4-IT:E finds applications in various electronic devices that require non-volatile data storage. Some of the common application fields include:

  1. Smartphones and tablets: Used for storing operating systems, applications, and user data.
  2. Digital cameras: Utilized for storing high-resolution photos and videos.
  3. Solid-state drives (SSDs): Employed as primary storage in computers and laptops, offering fast boot times and data access.

Detailed and Complete Alternative Models

  1. MT29F2G08ABBEAH4-ITE
  2. MT29F2G08ABBEAH4-ITD
  3. MT29F2G08ABBEAH4-ITC
  4. MT29F2G08ABBEAH4-

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של MT29F2G08ABBEAH4-IT:E בפתרונות טכניים

  1. Question: What is the MT29F2G08ABBEAH4-IT:E?
    Answer: The MT29F2G08ABBEAH4-IT:E is a specific model of NAND flash memory chip commonly used in technical solutions.

  2. Question: What is the storage capacity of the MT29F2G08ABBEAH4-IT:E?
    Answer: The MT29F2G08ABBEAH4-IT:E has a storage capacity of 2 gigabytes (GB).

  3. Question: What is the interface of the MT29F2G08ABBEAH4-IT:E?
    Answer: The MT29F2G08ABBEAH4-IT:E uses a standard NAND flash interface for data transfer.

  4. Question: What is the operating voltage range of the MT29F2G08ABBEAH4-IT:E?
    Answer: The MT29F2G08ABBEAH4-IT:E operates within a voltage range of 2.7V to 3.6V.

  5. Question: Can the MT29F2G08ABBEAH4-IT:E be used in industrial applications?
    Answer: Yes, the MT29F2G08ABBEAH4-IT:E is suitable for use in industrial applications due to its reliability and durability.

  6. Question: Does the MT29F2G08ABBEAH4-IT:E support wear-leveling algorithms?
    Answer: Yes, the MT29F2G08ABBEAH4-IT:E supports wear-leveling algorithms to ensure even distribution of write/erase cycles across the memory cells.

  7. Question: What is the maximum read and write speed of the MT29F2G08ABBEAH4-IT:E?
    Answer: The MT29F2G08ABBEAH4-IT:E has a maximum read speed of 25 megabytes per second (MB/s) and a maximum write speed of 10 MB/s.

  8. Question: Can the MT29F2G08ABBEAH4-IT:E be used in automotive applications?
    Answer: Yes, the MT29F2G08ABBEAH4-IT:E is suitable for use in automotive applications due to its wide temperature range and high reliability.

  9. Question: Does the MT29F2G08ABBEAH4-IT:E support error correction codes (ECC)?
    Answer: Yes, the MT29F2G08ABBEAH4-IT:E supports built-in ECC functionality to detect and correct errors during data transfer.

  10. Question: Is the MT29F2G08ABBEAH4-IT:E compatible with various operating systems?
    Answer: Yes, the MT29F2G08ABBEAH4-IT:E is compatible with different operating systems, making it versatile for integration into various technical solutions.