TC1300R-2.5VUATR

Product Overview

Category

The TC1300R-2.5VUATR belongs to the category of voltage regulators.

Use

This product is primarily used for regulating and stabilizing voltage in electronic circuits.

Characteristics

• Voltage Output: 2.5V
• Package Type: UATR (Ultra-Thin Array)
• Essence: Regulating voltage with high precision and efficiency
• Packaging/Quantity: Available in tape and reel packaging, with a quantity of 3000 units per reel

Specifications

The TC1300R-2.5VUATR has the following specifications:

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage: 2.5V ±1%
• Maximum Output Current: 150mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 40µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TC1300R-2.5VUATR has the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. EN: Enable pin
4. VOUT: Output voltage pin

Functional Features

• Low dropout voltage ensures efficient regulation even with low input voltages.
• Ultra-low quiescent current minimizes power consumption during standby or idle modes.
• Built-in thermal shutdown protection prevents overheating and damage to the device.
• Short-circuit and overcurrent protection safeguards the circuit from potential faults.
• Fast transient response enables quick stabilization of the output voltage.

Advantages and Disadvantages

Advantages

• High precision voltage regulation
• Efficient power management
• Compact and thin package design
• Wide input voltage range
• Low quiescent current

Disadvantages

• Limited maximum output current (150mA)
• Relatively high dropout voltage

Working Principles

The TC1300R-2.5VUATR operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage of 2.5V, regardless of changes in the input voltage or load conditions. This ensures that the connected electronic devices receive a consistent and reliable power supply.

Detailed Application Field Plans

The TC1300R-2.5VUATR finds applications in various fields, including:

1. Portable electronic devices: Provides regulated power supply for smartphones, tablets, and portable media players.
2. IoT devices: Ensures stable voltage for sensors, microcontrollers, and wireless communication modules.
3. Battery-powered systems: Regulates voltage in battery-operated devices such as wearables, medical devices, and handheld instruments.
4. Automotive electronics: Used in automotive applications like infotainment systems, navigation devices, and advanced driver assistance systems (ADAS).

Detailed and Complete Alternative Models

1. TC1300R-3.3VUATR: Similar to TC1300R-2.5VUATR but with an output voltage of 3.3V.
2. TC1300R-1.8VUATR: Similar to TC1300R-2.5VUATR but with an output voltage of 1.8V.
3. TC1300R-2.8VUATR: Similar to TC1300R-2.5VUATR but with an output voltage of 2.8V.
4. TC1300R-2.0VUATR: Similar to TC1300R-2.5VUATR but with an output voltage of 2.0V.

These alternative models provide different output voltages to cater to specific application requirements.

In conclusion, the TC1300R-2.5VUATR is a voltage regulator that offers precise and efficient voltage regulation in a compact package. With its wide input voltage range, low quiescent current, and various applications, it serves as a reliable power management solution for a range of electronic devices.