התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
24VL014H/SN

24VL014H/SN

Product Overview

Category: Integrated Circuit (IC)

Use: The 24VL014H/SN is a non-volatile memory IC that provides storage and retrieval of digital information. It is commonly used in electronic devices for data storage purposes.

Characteristics: - Non-volatile: Retains stored data even when power is removed - High storage capacity: 14 kilobits (1,792 bytes) - Low power consumption: Ideal for battery-powered devices - Serial interface: Allows easy integration with microcontrollers and other digital systems

Package: The 24VL014H/SN is available in a small surface mount package, making it suitable for compact electronic designs.

Essence: The essence of the 24VL014H/SN lies in its ability to provide reliable and non-volatile storage of digital information in a compact form factor.

Packaging/Quantity: The 24VL014H/SN is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Memory Capacity: 14 kilobits (1,792 bytes)
  • Interface: I2C (Inter-Integrated Circuit)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: Up to 200 years
  • Write Endurance: 1 million write cycles

Pin Configuration

The 24VL014H/SN has a total of 8 pins, which are assigned specific functions:

  1. VCC: Power supply input
  2. SDA: Serial data input/output
  3. SCL: Serial clock input
  4. WP: Write protect input
  5. GND: Ground connection
  6. NC: No connection
  7. NC: No connection
  8. VSS: Ground connection

Functional Features

  • Byte-level Read and Write Operations: Allows individual bytes of data to be read from or written to the memory.
  • Sequential Read: Enables continuous reading of multiple bytes without the need for repeated address selection.
  • Hardware Write Protection: The WP pin can be used to protect the memory from accidental writes.
  • Software Write Protection: Configurable write protection using specific commands.

Advantages

  • Non-volatile memory: Data is retained even during power loss, ensuring data integrity.
  • Compact form factor: Suitable for space-constrained electronic designs.
  • Low power consumption: Ideal for battery-powered devices, extending battery life.
  • Easy integration: Serial interface simplifies connectivity with microcontrollers and other digital systems.

Disadvantages

  • Limited storage capacity: May not be suitable for applications requiring large amounts of data storage.
  • Relatively slower access speed compared to some other memory technologies.
  • Vulnerable to electromagnetic interference (EMI) due to its small size and sensitivity to external disturbances.

Working Principles

The 24VL014H/SN utilizes Electrically Erasable Programmable Read-Only Memory (EEPROM) technology. It stores data by trapping electric charges within a floating gate structure. These charges can be selectively removed or added using electrical signals, allowing data to be erased and reprogrammed as needed.

During read operations, the stored charges are sensed and converted into digital data. Write operations involve applying specific voltage levels to the memory cells, modifying the charge distribution and thus altering the stored data.

Application Field Plans

The 24VL014H/SN finds application in various electronic devices that require non-volatile memory for data storage. Some potential application fields include:

  1. Consumer Electronics: Used in smart TVs, set-top boxes, and audio/video equipment for storing user preferences, settings, and firmware updates.
  2. Industrial Automation: Employed in programmable logic controllers (PLCs), sensors, and control systems for storing configuration data and event logs.
  3. Automotive Electronics: Integrated into automotive modules for storing vehicle parameters, calibration data, and error codes.
  4. Medical Devices: Utilized in medical equipment for storing patient data, device configurations, and firmware updates.

Alternative Models

  1. 24LC014-I/SN: Similar to the 24VL014H/SN, but with a lower operating voltage range of 2.5V to 5.5V.
  2. 24AA014T-I/OT: Offers the same storage capacity and interface as the 24VL014H/SN but features an extended temperature range of -40°C to +125°C.
  3. 24FC014T-I/MS: Provides the same functionality as the 24VL014H/SN but comes in a different package (MSOP) for ease of soldering.

These alternative models offer similar capabilities to the 24VL014H/SN, allowing users to choose the most suitable option based

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של 24VL014H/SN בפתרונות טכניים

  1. What is the maximum operating temperature for 24VL014H/SN?
    - The maximum operating temperature for 24VL014H/SN is 85°C.

  2. What is the typical input voltage range for 24VL014H/SN?
    - The typical input voltage range for 24VL014H/SN is 2.7V to 5.5V.

  3. Can 24VL014H/SN be used in automotive applications?
    - Yes, 24VL014H/SN is suitable for automotive applications.

  4. What is the typical standby current for 24VL014H/SN?
    - The typical standby current for 24VL014H/SN is 1µA.

  5. Does 24VL014H/SN have built-in overvoltage protection?
    - Yes, 24VL014H/SN features built-in overvoltage protection.

  6. What is the typical output current for 24VL014H/SN?
    - The typical output current for 24VL014H/SN is 150mA.

  7. Is 24VL014H/SN compatible with low ESR ceramic capacitors?
    - Yes, 24VL014H/SN is compatible with low ESR ceramic capacitors.

  8. Can 24VL014H/SN be used in battery-powered applications?
    - Yes, 24VL014H/SN is suitable for battery-powered applications.

  9. What is the typical dropout voltage for 24VL014H/SN?
    - The typical dropout voltage for 24VL014H/SN is 200mV at 100mA load.

  10. Does 24VL014H/SN have thermal shutdown protection?
    - Yes, 24VL014H/SN includes thermal shutdown protection.