Melexis Technologies NV
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
MLX90363KDC-ABB-000-TU
צפה בפרטים DataSheets

MLX90363KDC-ABB-000-TU

Product Overview

Category

The MLX90363KDC-ABB-000-TU belongs to the category of magnetic sensors.

Use

This sensor is used for measuring and detecting magnetic fields in various applications.

Characteristics

  • High sensitivity
  • Wide operating temperature range
  • Digital output
  • Low power consumption

Package

The MLX90363KDC-ABB-000-TU is available in a small surface-mount package.

Essence

The essence of this sensor lies in its precise and reliable measurement of magnetic fields.

Packaging/Quantity

The sensor is typically packaged in reels and is available in varying quantities based on customer requirements.

Specifications

  • Operating Voltage: 2.2V to 3.6V
  • Output Interface: I2C, SPI
  • Operating Temperature: -40°C to 150°C
  • Measurement Range: ±50mT to ±1000mT
  • Resolution: 16-bit

Detailed Pin Configuration

The MLX90363KDC-ABB-000-TU has a total of 8 pins: 1. VDD 2. GND 3. SDA (I2C data) 4. SCL (I2C clock) 5. CS (SPI chip select) 6. SDO (SPI data out) 7. SDI (SPI data in) 8. CLK (SPI clock)

Functional Features

  • Non-contact magnetic field sensing
  • Integrated temperature compensation
  • Programmable output data rate
  • Self-test functionality

Advantages

  • High accuracy and resolution
  • Wide operating temperature range
  • Small form factor
  • Low power consumption

Disadvantages

  • Limited measurement range compared to some other sensors
  • Higher cost compared to traditional magnetic sensors

Working Principles

The MLX90363KDC-ABB-000-TU operates based on the Hall effect, where it detects changes in magnetic fields and converts them into digital output signals. The integrated temperature compensation ensures accurate measurements across varying temperatures.

Detailed Application Field Plans

This sensor is widely used in automotive applications for position sensing, such as throttle control, pedal position sensing, and gear shift detection. Additionally, it finds use in industrial automation for proximity sensing and angular position measurement in rotary encoders.

Detailed and Complete Alternative Models

Some alternative models to the MLX90363KDC-ABB-000-TU include: - MLX90364 - MLX90365 - MLX90366

These models offer similar functionality with slight variations in features and specifications.

In conclusion, the MLX90363KDC-ABB-000-TU is a versatile magnetic sensor with high precision and reliability, making it suitable for a wide range of applications in automotive and industrial settings.

[Word Count: 398]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של MLX90363KDC-ABB-000-TU בפתרונות טכניים

Sure, here are 10 common questions and answers related to the application of MLX90363KDC-ABB-000-TU in technical solutions:

  1. What is the MLX90363KDC-ABB-000-TU?

    • The MLX90363KDC-ABB-000-TU is a high-accuracy three-dimensional Hall sensor designed for use in various technical applications.

  2. What are the key features of the MLX90363KDC-ABB-000-TU?

    • The key features include high accuracy, three-dimensional magnetic field measurement, digital output, and low power consumption.

  3. How can the MLX90363KDC-ABB-000-TU be used in automotive applications?

    • It can be used for contactless throttle position sensing, pedal position sensing, gear shift detection, and other automotive control applications.

  4. In what industrial applications can the MLX90363KDC-ABB-000-TU be utilized?

    • It can be used for linear and rotary position sensing, current sensing, and motor commutation in industrial automation and robotics.

  5. What are the advantages of using the MLX90363KDC-ABB-000-TU in consumer electronics?

    • It offers precise joystick and knob position sensing, as well as gesture recognition in consumer electronic devices.

  6. How does the MLX90363KDC-ABB-000-TU support IoT applications?

    • It provides accurate angular position sensing for smart home devices, wearable technology, and other IoT applications.

  7. Can the MLX90363KDC-ABB-000-TU be integrated into medical devices?

    • Yes, it can be used for non-contact rotary and linear position sensing in medical equipment such as infusion pumps and patient monitoring devices.

  8. What are the communication interfaces supported by the MLX90363KDC-ABB-000-TU?

    • It supports I2C, SPI, and PWM interfaces for seamless integration with microcontrollers and other digital systems.

  9. How does the MLX90363KDC-ABB-000-TU ensure reliability in harsh environments?

    • It is designed to withstand electromagnetic interference, vibration, and extreme temperatures, making it suitable for rugged industrial and automotive environments.

  10. What kind of programming or calibration is required for the MLX90363KDC-ABB-000-TU?

    • It comes with pre-programmed settings and does not require user calibration, simplifying the integration process.

I hope these questions and answers provide a good overview of the application of MLX90363KDC-ABB-000-TU in technical solutions. Let me know if you need further information on any specific aspect!