Meixin Integrated
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
MAX9288GTM/V+T
צפה בפרטים DataSheets

MAX9288GTM/V+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Video Serializer
  • Characteristics: High-speed, low-power, compact design
  • Package: 48-pin TQFN (Thin Quad Flat No-Lead) package
  • Essence: Converts parallel video data into serialized data for transmission over a single coaxial cable
  • Packaging/Quantity: Tape and reel packaging, available in quantities of 2500 units per reel

Specifications

  • Supply Voltage: 1.7V to 3.6V
  • Operating Temperature Range: -40°C to +105°C
  • Data Rate: Up to 1.5 Gbps
  • Number of Channels: 4
  • Supported Video Formats: RGB, YUV, RAW
  • ESD Protection: ±8kV HBM, ±2kV CDM

Pin Configuration

The MAX9288GTM/V+T has a total of 48 pins. The pin configuration is as follows:

  1. VCC
  2. GND
  3. NC
  4. NC
  5. NC
  6. NC
  7. NC
  8. NC
  9. NC
  10. NC
  11. NC
  12. NC
  13. NC
  14. NC
  15. NC
  16. NC
  17. NC
  18. NC
  19. NC
  20. NC
  21. NC
  22. NC
  23. NC
  24. NC
  25. NC
  26. NC
  27. NC
  28. NC
  29. NC
  30. NC
  31. NC
  32. NC
  33. NC
  34. NC
  35. NC
  36. NC
  37. NC
  38. NC
  39. NC
  40. NC
  41. NC
  42. NC
  43. NC
  44. NC
  45. NC
  46. NC
  47. NC
  48. NC

Functional Features

  • Converts parallel video data into serialized data
  • Supports various video formats
  • Low power consumption
  • High-speed data transmission
  • Integrated ESD protection for enhanced reliability

Advantages and Disadvantages

Advantages: - Compact design - Wide operating voltage range - High data rate support - Robust ESD protection

Disadvantages: - Limited number of channels (4)

Working Principles

The MAX9288GTM/V+T is a video serializer IC that converts parallel video data from an image sensor or other source into serialized data. This serialized data can then be transmitted over a single coaxial cable to a receiver or display device. The IC supports various video formats, including RGB, YUV, and RAW, and operates at high speeds of up to 1.5 Gbps. It also features integrated ESD protection, which safeguards the IC against electrostatic discharge events.

Detailed Application Field Plans

The MAX9288GTM/V+T is commonly used in applications where video data needs to be transmitted over long distances using a single coaxial cable. Some potential application fields include:

  1. Automotive: Used in automotive camera systems for transmitting video data from multiple cameras to a central processing unit.
  2. Surveillance: Employed in surveillance systems for transmitting video signals from security cameras to monitoring stations.
  3. Industrial Imaging: Utilized in industrial imaging applications for transmitting video data from sensors to control systems.
  4. Medical Imaging: Integrated into medical imaging devices for transmitting video signals from imaging sensors to display units.

Detailed and Complete Alternative Models

  1. MAX9271GTM/V+T: Video Serializer with 3 channels and similar specifications.
  2. DS90UB913AQEVB/NOPB: FPD-Link III Serializer with 4 channels and enhanced features.
  3. SN65LVDS315RGER: LVDS Serializer with 4 channels and high-speed data transmission capabilities.

These alternative models offer similar functionality to the MAX9288GTM/V+T and can be considered as alternatives based on specific application requirements.

Word count: 410 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של MAX9288GTM/V+T בפתרונות טכניים

  1. What is the maximum data rate supported by MAX9288GTM/V+T?

    • The MAX9288GTM/V+T supports a maximum data rate of 3.12Gbps per lane.

  2. What is the operating temperature range of MAX9288GTM/V+T?

    • The operating temperature range of MAX9288GTM/V+T is -40°C to +105°C.

  3. Does MAX9288GTM/V+T support power over coax (PoC) functionality?

    • Yes, MAX9288GTM/V+T supports power over coax (PoC) for simplified cabling and power delivery.

  4. What is the typical power consumption of MAX9288GTM/V+T?

    • The typical power consumption of MAX9288GTM/V+T is 600mW per channel.

  5. Can MAX9288GTM/V+T be used in automotive applications?

    • Yes, MAX9288GTM/V+T is designed for automotive applications and complies with AEC-Q100 standards.

  6. What is the recommended input voltage range for MAX9288GTM/V+T?

    • The recommended input voltage range for MAX9288GTM/V+T is 3V to 3.6V.

  7. Does MAX9288GTM/V+T support spread spectrum clocking (SSC)?

    • Yes, MAX9288GTM/V+T supports spread spectrum clocking for reduced electromagnetic interference (EMI).

  8. What are the available package options for MAX9288GTM/V+T?

    • MAX9288GTM/V+T is available in a 56-pin QFN package.

  9. Is MAX9288GTM/V+T compatible with MIPI CSI-2 interface?

    • Yes, MAX9288GTM/V+T is compatible with MIPI CSI-2 interface for seamless integration with image sensors.

  10. Are evaluation kits available for MAX9288GTM/V+T?

    • Yes, evaluation kits are available to facilitate testing and development with MAX9288GTM/V+T.