Meixin Integrated
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
MAX9263GCB/V+T
צפה בפרטים DataSheets

MAX9263GCB/V+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: High-speed Serializer and Deserializer (SerDes) for automotive camera applications
  • Characteristics:
    • Supports high-speed data transmission over a single coaxial cable
    • Provides robust communication between cameras and electronic control units (ECUs)
    • Enables long-distance transmission with minimal signal degradation
  • Package: 64-pin TQFP (Thin Quad Flat Package)
  • Essence: MAX9263GCB/V+T is a key component in automotive camera systems, facilitating reliable and efficient data transfer.
  • Packaging/Quantity: Available in tape and reel packaging, with a quantity of 2500 units per reel.

Specifications

  • Data Rate: Up to 1.5 Gbps
  • Operating Voltage: 3.3V
  • Temperature Range: -40°C to +105°C
  • Interface: Serial LVDS (Low-Voltage Differential Signaling)
  • Power Consumption: 200mW (typical)

Pin Configuration

The MAX9263GCB/V+T features a detailed pin configuration as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Power supply voltage input | | 2 | GND | Ground reference | | 3 | SDA | Serial Data Input | | 4 | SCL | Serial Clock Input | | ... | ... | ... | | 64 | NC | No Connection |

Functional Features

  • High-speed serialization and deserialization of camera data
  • Built-in error detection and correction mechanisms
  • Support for multiple camera inputs
  • Low power consumption
  • Robust communication over long distances
  • Compliance with automotive industry standards

Advantages and Disadvantages

Advantages

  • Enables efficient data transmission in automotive camera systems
  • Supports high-speed communication over a single coaxial cable
  • Provides reliable and robust signal integrity
  • Low power consumption enhances overall system efficiency
  • Compact package size allows for easy integration into camera modules

Disadvantages

  • Limited to automotive camera applications
  • Requires additional components for complete camera system implementation
  • Relatively high cost compared to non-automotive-specific alternatives

Working Principles

The MAX9263GCB/V+T operates based on the principles of serialization and deserialization. It receives parallel camera data and converts it into a high-speed serial LVDS stream for transmission over a single coaxial cable. At the receiving end, the device deserializes the received data back into parallel format for further processing by the electronic control unit (ECU).

Detailed Application Field Plans

The MAX9263GCB/V+T is primarily designed for use in automotive camera systems. It finds application in various areas, including:

  1. Advanced Driver Assistance Systems (ADAS)
  2. Surround View Systems
  3. Rearview Cameras
  4. Lane Departure Warning Systems
  5. Blind Spot Detection Systems

Alternative Models

For those seeking alternative options, the following models can be considered:

  1. TI DS90UB954-Q1
  2. NXP PTN5150AHB
  3. ON Semiconductor FPD-Link III

These models offer similar functionality and are suitable for automotive camera applications.

Word count: 442 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של MAX9263GCB/V+T בפתרונות טכניים

  1. What is the maximum data rate supported by MAX9263GCB/V+T?
    - The maximum data rate supported by MAX9263GCB/V+T is 3.12Gbps.

  2. Can MAX9263GCB/V+T be used for automotive applications?
    - Yes, MAX9263GCB/V+T is designed for automotive applications and is AEC-Q100 qualified.

  3. What is the operating voltage range of MAX9263GCB/V+T?
    - The operating voltage range of MAX9263GCB/V+T is 3V to 3.6V.

  4. Does MAX9263GCB/V+T support spread spectrum clocking?
    - Yes, MAX9263GCB/V+T supports spread spectrum clocking for reduced EMI.

  5. What is the typical power consumption of MAX9263GCB/V+T?
    - The typical power consumption of MAX9263GCB/V+T is 125mW.

  6. Can MAX9263GCB/V+T be used in point-to-point or daisy-chain configurations?
    - Yes, MAX9263GCB/V+T can be used in both point-to-point and daisy-chain configurations.

  7. What is the maximum cable length supported by MAX9263GCB/V+T?
    - The maximum cable length supported by MAX9263GCB/V+T is 15 meters.

  8. Does MAX9263GCB/V+T have built-in diagnostic features?
    - Yes, MAX9263GCB/V+T has built-in diagnostic features for monitoring link status and cable integrity.

  9. Is MAX9263GCB/V+T compatible with other Maxim Integrated products?
    - Yes, MAX9263GCB/V+T is compatible with other Maxim Integrated GMSL products for flexible system design.

  10. What are the available package options for MAX9263GCB/V+T?
    - MAX9263GCB/V+T is available in a 56-pin WQFN package.