MAX15096DGWE+T
Product Overview
- Category: Integrated Circuit (IC)
- Use: Power Management
- Characteristics: High Efficiency, Low Quiescent Current
- Package: 24-Pin TSSOP (Thin Shrink Small Outline Package)
- Essence: Voltage Regulator
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Input Voltage Range: 4.5V to 60V
- Output Voltage Range: 0.8V to 55V
- Maximum Output Current: 1.5A
- Switching Frequency: 100kHz to 2MHz
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The MAX15096DGWE+T has a total of 24 pins. The pin configuration is as follows:
- VIN: Input Voltage
- EN: Enable Pin
- FB: Feedback Pin
- COMP: Compensation Pin
- SS/TR: Soft-Start/Tracking Pin
- PGND: Power Ground
- AGND: Analog Ground
- VCC: Supply Voltage
- BST: Bootstrap Pin
- SW: Switch Node
- LX: Inductor Connection
- PG: Power Good Indicator
- VOUT: Output Voltage
- NC: No Connect
- NC: No Connect
- NC: No Connect
- NC: No Connect
- NC: No Connect
- NC: No Connect
- NC: No Connect
- NC: No Connect
- NC: No Connect
- NC: No Connect
- NC: No Connect
Functional Features
- Wide input voltage range allows for versatile applications.
- High efficiency ensures minimal power loss.
- Low quiescent current reduces standby power consumption.
- Integrated protection features such as overvoltage and overcurrent protection enhance system reliability.
Advantages and Disadvantages
Advantages: - Wide input voltage range enables compatibility with various power sources. - High efficiency results in energy savings and reduced heat dissipation. - Low quiescent current prolongs battery life in portable applications. - Integrated protection features enhance system reliability.
Disadvantages: - Limited maximum output current may restrict usage in high-power applications. - Switching frequency range may not be suitable for all applications.
Working Principles
The MAX15096DGWE+T is a voltage regulator IC that converts an input voltage to a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The input voltage is first stepped down using a power MOSFET and an inductor. The resulting voltage is then filtered and regulated to provide a stable output voltage. The device incorporates control circuitry to adjust the duty cycle of the power MOSFET, ensuring the desired output voltage is maintained.
Detailed Application Field Plans
The MAX15096DGWE+T is commonly used in various applications, including:
- Automotive: Power management in automotive systems, such as infotainment systems, lighting, and motor control.
- Industrial: Voltage regulation in industrial equipment, such as factory automation systems and power supplies.
- Telecommunications: Power management in telecommunications infrastructure, including base stations and network equipment.
- Consumer Electronics: Voltage regulation in consumer electronic devices, such as smartphones, tablets, and gaming consoles.
Detailed and Complete Alternative Models
- MAX15097DGWE+T: Similar specifications and pin configuration, but with a higher maximum output current of 3A.
- MAX15098DGWE+T: Similar specifications and pin configuration, but with a lower maximum output current of 1A.
- MAX15099DGWE+T: Similar specifications and pin configuration, but with a wider input voltage range of 4.5V to 75V.
These alternative models provide options for different power requirements and application scenarios while maintaining compatibility with the MAX15096DGWE+T in terms of pin configuration and functionality.
Word count: 430 words
רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של MAX15096DGWE+T בפתרונות טכניים
Sure! Here are 10 common questions and answers related to the application of MAX15096DGWE+T in technical solutions:
Q: What is MAX15096DGWE+T? A: MAX15096DGWE+T is a high-voltage, current-mode PWM controller designed for automotive applications.
Q: What are the key features of MAX15096DGWE+T? A: Some key features include wide input voltage range, adjustable switching frequency, integrated protection features, and low quiescent current.
Q: What is the typical application of MAX15096DGWE+T? A: MAX15096DGWE+T is commonly used in automotive power supply systems, such as DC-DC converters and LED lighting applications.
Q: What is the maximum input voltage supported by MAX15096DGWE+T? A: The maximum input voltage supported is up to 42V.
Q: Can MAX15096DGWE+T operate at high temperatures? A: Yes, MAX15096DGWE+T is designed to operate over a wide temperature range, typically from -40°C to +125°C.
Q: Does MAX15096DGWE+T have any built-in protection features? A: Yes, it includes features like overvoltage protection, undervoltage lockout, thermal shutdown, and cycle-by-cycle current limit.
Q: How can I adjust the switching frequency of MAX15096DGWE+T? A: The switching frequency can be adjusted using an external resistor connected to the RT pin.
Q: Can MAX15096DGWE+T drive high-power LEDs directly? A: No, it requires an external MOSFET or driver to drive high-power LEDs.
Q: What is the quiescent current of MAX15096DGWE+T? A: The quiescent current is typically around 100µA.
Q: Is MAX15096DGWE+T RoHS compliant? A: Yes, MAX15096DGWE+T is RoHS compliant and meets the requirements of the European Union's Restriction of Hazardous Substances directive.
Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.