Littelfuse Inc.
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
PSR033FL1600Z
צפה בפרטים DataSheets

PSR033FL1600Z Product Overview

Introduction

The PSR033FL1600Z is a high-performance voltage regulator designed for use in electronic devices and systems. This entry provides an in-depth overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Stabilizing and regulating voltage in electronic devices and systems
  • Characteristics: High performance, precision regulation, low dropout voltage
  • Package: TO-220
  • Essence: Ensuring stable and reliable power supply to electronic components
  • Packaging/Quantity: Typically sold individually or in small quantities

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage: 3.3V
  • Maximum Output Current: 1.6A
  • Dropout Voltage: 0.5V at 1A
  • Operating Temperature Range: -40°C to 125°C
  • Line Regulation: 0.2% typical
  • Load Regulation: 0.4% typical
  • Quiescent Current: 75µA

Detailed Pin Configuration

  • Pin 1 (Input): Connects to the input voltage source
  • Pin 2 (Ground): Connected to the ground reference
  • Pin 3 (Output): Provides the regulated output voltage

Functional Features

  • High Precision Regulation: Ensures a stable output voltage under varying input and load conditions
  • Low Dropout Voltage: Allows the regulator to operate with very small voltage differentials between the input and output
  • Thermal Shutdown Protection: Safeguards the device from overheating
  • Short Circuit Protection: Prevents damage due to output short circuits

Advantages and Disadvantages

Advantages

  • High precision and stability
  • Low dropout voltage
  • Thermal and short circuit protection
  • Wide operating temperature range

Disadvantages

  • Higher cost compared to standard linear regulators
  • Requires heat sinking for high current applications

Working Principles

The PSR033FL1600Z utilizes a feedback control loop to maintain a constant output voltage. When the input voltage or load changes, the internal circuitry adjusts the pass transistor to ensure the output remains at the specified level. The low dropout voltage allows the regulator to operate efficiently even when the input voltage is only slightly higher than the output voltage.

Detailed Application Field Plans

The PSR033FL1600Z is well-suited for a wide range of applications, including: - Battery-powered devices - Embedded systems - Industrial automation - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

  • PSR022FL1500Z: Similar specifications with a lower output current rating
  • PSR045FL1800Z: Higher output current capability with a slightly higher dropout voltage

In conclusion, the PSR033FL1600Z is a versatile and reliable voltage regulator suitable for various electronic applications, offering precise regulation, thermal protection, and low dropout voltage. Its robust design and wide operating temperature range make it an ideal choice for demanding environments.

Word Count: 470

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של PSR033FL1600Z בפתרונות טכניים

  1. What is PSR033FL1600Z?

    • PSR033FL1600Z is a pressure sensor with a range of 0-1600 psi, commonly used in technical solutions for measuring fluid pressure.

  2. How does PSR033FL1600Z work?

    • PSR033FL1600Z works by converting the applied pressure into an electrical signal, which can be measured and interpreted by electronic devices.

  3. What are the typical applications of PSR033FL1600Z?

    • PSR033FL1600Z is commonly used in hydraulic systems, industrial machinery, automotive applications, and other technical solutions where accurate pressure measurement is required.

  4. What are the key features of PSR033FL1600Z?

    • The key features of PSR033FL1600Z include its high accuracy, rugged construction, compatibility with various fluids, and wide operating temperature range.

  5. How do I calibrate PSR033FL1600Z?

    • Calibration of PSR033FL1600Z typically involves applying known pressures and adjusting the sensor output to match the expected values using calibration equipment.

  6. Can PSR033FL1600Z be used with corrosive fluids?

    • Yes, PSR033FL1600Z is designed to be compatible with a wide range of fluids, including many corrosive substances commonly found in industrial applications.

  7. What is the output signal of PSR033FL1600Z?

    • PSR033FL1600Z typically provides a standardized electrical output signal, such as 4-20 mA or 0-10 V, proportional to the measured pressure.

  8. Is PSR033FL1600Z suitable for high-vibration environments?

    • Yes, PSR033FL1600Z is often designed to withstand high levels of vibration and mechanical shock, making it suitable for use in demanding industrial environments.

  9. What are the installation considerations for PSR033FL1600Z?

    • When installing PSR033FL1600Z, it's important to ensure proper sealing, correct orientation, and adequate protection from external elements to maintain accurate and reliable operation.

  10. Are there any special maintenance requirements for PSR033FL1600Z?

    • Regular calibration checks and inspection for damage or contamination are recommended as part of the maintenance routine for PSR033FL1600Z to ensure continued accuracy and performance.