Littelfuse Inc.
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
1210L035YR
צפה בפרטים DataSheets

1210L035YR Product Overview

Product Identification

  • Product Name: 1210L035YR
  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: Small form factor, high efficiency, low power consumption
  • Package: Surface mount package
  • Essence: Regulates voltage to ensure stable power supply
  • Packaging/Quantity: Typically sold in reels of 3000 units

Specifications

  • Input Voltage Range: 3V to 36V
  • Output Voltage: 3.3V
  • Maximum Output Current: 150mA
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: SOT-23

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)

Functional Features

  • Voltage Regulation: Maintains a stable output voltage despite fluctuations in the input voltage.
  • Overcurrent Protection: Safeguards the circuit by limiting the output current in case of a fault condition.
  • Low Dropout Voltage: Ensures efficient operation even when the input voltage is close to the output voltage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for compact designs
  • High efficiency leads to lower power dissipation
  • Wide input voltage range enhances versatility

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Sensitive to excessive noise in the input voltage

Working Principles

The 1210L035YR utilizes a feedback control loop to compare the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage.

Detailed Application Field Plans

  • Portable Electronics: Ideal for battery-powered devices due to its low power consumption and small size.
  • IoT Devices: Suitable for IoT sensors and modules requiring stable power supply in various operating conditions.

Detailed and Complete Alternative Models

  • 1210L033YR: Similar specifications with a 3.3V output
  • 1210L050YR: Higher output voltage at 5V, suitable for different applications

In conclusion, the 1210L035YR voltage regulator offers a compact and efficient solution for stabilizing power supplies in various electronic devices, particularly those with stringent size and power requirements.

Word Count: 336

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של 1210L035YR בפתרונות טכניים

  1. What is 1210L035YR and what is its application in technical solutions?

    • 1210L035YR is a specific type of electronic component, often a surface mount resistor, commonly used in technical solutions to control current flow and voltage levels in electronic circuits.

  2. What are the key specifications of 1210L035YR?

    • The key specifications typically include resistance value (in ohms), power rating (in watts), tolerance, and temperature coefficient.

  3. How is 1210L035YR typically used in circuit design?

    • It is commonly used to limit current, divide voltages, terminate transmission lines, and provide biasing in various electronic circuits.

  4. What are the typical applications of 1210L035YR in technical solutions?

    • It can be found in power supplies, amplifiers, filters, sensors, and many other electronic devices where precise resistance values are required.

  5. What are the advantages of using 1210L035YR in technical solutions?

    • Its small size, high precision, and reliability make it suitable for compact and high-performance electronic designs.

  6. Are there any limitations or considerations when using 1210L035YR in technical solutions?

    • Care should be taken to ensure proper heat dissipation and voltage ratings are not exceeded to prevent damage or failure.

  7. Can 1210L035YR be used in high-frequency applications?

    • Yes, it can be used in high-frequency applications, but attention should be paid to its parasitic effects and frequency response.

  8. What are the alternatives to 1210L035YR for similar applications?

    • Other surface mount resistors with different specifications or technologies, such as thin film or thick film resistors, can be considered based on specific requirements.

  9. How can one determine the appropriate 1210L035YR for a given technical solution?

    • By considering the required resistance value, power handling capability, tolerance, and temperature coefficient, and ensuring compatibility with the overall circuit design.

  10. Where can one source 1210L035YR components for technical solutions?

    • They can be sourced from electronic component distributors, manufacturers, or authorized resellers, ensuring genuine and reliable products for use in technical solutions.