LT3494EDDB#TRMPBF
Product Overview
Category: Integrated Circuit (IC)
Use: Power management and LED driver
Characteristics: - High efficiency - Wide input voltage range - Adjustable output current - Dimming control - Thermal shutdown protection
Package: DFN-10 (3mm x 3mm)
Essence: The LT3494EDDB#TRMPBF is a power management and LED driver IC designed for driving multiple LEDs in series. It provides high efficiency and precise current regulation for various LED lighting applications.
Packaging/Quantity: The LT3494EDDB#TRMPBF is available in tape and reel packaging, with 2500 units per reel.
Specifications
- Input Voltage Range: 2.7V to 30V
- Output Current Range: Up to 1A
- Switching Frequency: 1MHz
- Dimming Control: Analog/PWM
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The LT3494EDDB#TRMPBF has the following pin configuration:
- VIN: Input voltage
- GND: Ground
- FB: Feedback pin for current regulation
- EN: Enable pin for turning on/off the device
- DIM: Dimming control pin
- SW: Switch node for driving LEDs
- LX: Inductor connection
- VOUT: Output voltage
- VCC: Supply voltage for internal circuitry
- PGND: Power ground
Functional Features
- High efficiency step-up converter
- Constant current output for driving LEDs
- Adjustable output current through external resistor
- Dimming control for brightness adjustment
- Over-temperature protection with thermal shutdown
Advantages and Disadvantages
Advantages: - High efficiency operation - Wide input voltage range allows for versatile applications - Precise current regulation for consistent LED brightness - Dimming control provides flexibility in lighting design - Thermal shutdown protection ensures device safety
Disadvantages: - Limited maximum output current (up to 1A) - Requires external components for operation - Not suitable for driving high-power LEDs
Working Principles
The LT3494EDDB#TRMPBF operates as a step-up converter to drive multiple LEDs in series. It uses a high-frequency switching regulator to efficiently convert the input voltage to a higher output voltage required by the LEDs. The output current is regulated through a feedback loop, ensuring consistent brightness across the LEDs.
The device also features dimming control, which can be achieved through analog or PWM (Pulse Width Modulation) signals. This allows for adjustable brightness levels according to the application requirements.
To ensure safe operation, the LT3494EDDB#TRMPBF includes thermal shutdown protection. If the temperature exceeds a certain threshold, the device will shut down to prevent damage.
Detailed Application Field Plans
The LT3494EDDB#TRMPBF is widely used in various LED lighting applications, including: - Automotive lighting - Backlighting for LCD displays - General illumination - Portable devices - Signage and advertising displays
Its high efficiency, wide input voltage range, and dimming control make it suitable for a broad range of lighting designs.
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the LT3494EDDB#TRMPBF are: - LT3494EDDB#PBF - LT3494EDDB#TRPBF - LT3494EDDB#TRMPBFI
These models have slight variations in package options or operating temperature ranges but provide comparable features and performance.
Word count: 409
רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של LT3494EDDB#TRMPBF בפתרונות טכניים
Sure! Here are 10 common questions and answers related to the application of LT3494EDDB#TRMPBF in technical solutions:
Q: What is LT3494EDDB#TRMPBF? A: LT3494EDDB#TRMPBF is a specific model number for a power management IC (integrated circuit) designed by Linear Technology (now part of Analog Devices). It is commonly used in various technical solutions.
Q: What are the key features of LT3494EDDB#TRMPBF? A: Some key features of LT3494EDDB#TRMPBF include high efficiency, wide input voltage range, adjustable output voltage, integrated power switches, and thermal shutdown protection.
Q: What are the typical applications of LT3494EDDB#TRMPBF? A: LT3494EDDB#TRMPBF is often used in applications such as LED lighting, backlighting, portable devices, automotive lighting, and general-purpose step-up or step-down voltage conversion.
Q: What is the maximum input voltage supported by LT3494EDDB#TRMPBF? A: The maximum input voltage supported by LT3494EDDB#TRMPBF is typically around 36V, but it is always recommended to refer to the datasheet for precise specifications.
Q: How can I adjust the output voltage of LT3494EDDB#TRMPBF? A: The output voltage of LT3494EDDB#TRMPBF can be adjusted using external resistors connected to the feedback pin (FB) of the IC. The datasheet provides detailed guidelines on how to calculate the resistor values.
Q: Does LT3494EDDB#TRMPBF have built-in protection features? A: Yes, LT3494EDDB#TRMPBF incorporates various protection features such as thermal shutdown, overcurrent protection, and input undervoltage lockout (UVLO) to ensure safe operation.
Q: Can LT3494EDDB#TRMPBF drive high-power LEDs directly? A: Yes, LT3494EDDB#TRMPBF is capable of driving high-power LEDs directly by providing a constant current output. However, it is important to consider the power dissipation and thermal management requirements.
Q: Is LT3494EDDB#TRMPBF suitable for battery-powered applications? A: Yes, LT3494EDDB#TRMPBF is well-suited for battery-powered applications due to its low quiescent current, high efficiency, and ability to operate with a wide input voltage range.
Q: Are there any evaluation boards or reference designs available for LT3494EDDB#TRMPBF? A: Yes, Analog Devices provides evaluation boards and reference designs for LT3494EDDB#TRMPBF, which can help in understanding its application and facilitate prototyping.
Q: Where can I find more information about LT3494EDDB#TRMPBF? A: You can find detailed information about LT3494EDDB#TRMPBF, including datasheets, application notes, and technical support, on the official website of Analog Devices or by contacting their customer support team.
Please note that the answers provided here are general and may vary depending on specific use cases and requirements. It is always recommended to refer to the official documentation and consult with experts when implementing LT3494EDDB#TRMPBF in technical solutions.