ISSI, Integrated Silicon Solution Inc
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
IS25LQ010B-JNLE-TR
צפה בפרטים DataSheets

IS25LQ010B-JNLE-TR

Product Overview

Category

IS25LQ010B-JNLE-TR belongs to the category of Serial NOR Flash Memory.

Use

This product is primarily used for storing and retrieving data in electronic devices such as microcontrollers, digital cameras, set-top boxes, and other consumer electronics.

Characteristics

  • High-speed data transfer rate
  • Non-volatile memory
  • Low power consumption
  • Compact size
  • Wide operating voltage range

Package

IS25LQ010B-JNLE-TR is available in a small form factor package, typically a 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of IS25LQ010B-JNLE-TR lies in its ability to provide reliable and fast non-volatile memory storage for various electronic devices.

Packaging/Quantity

IS25LQ010B-JNLE-TR is commonly packaged in reels or tubes, with a typical quantity of 2500 units per reel.

Specifications

  • Memory Size: 1 Megabit (128 Kilobytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage Range: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: Up to 20 years
  • Erase/Program Cycle Endurance: 100,000 cycles

Detailed Pin Configuration

IS25LQ010B-JNLE-TR has the following pin configuration:

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Hold (/HOLD)
  7. Ground (GND)
  8. Power Supply (VCC)

Functional Features

  • High-speed read and write operations
  • Sector erase and byte/page program operations
  • Software and hardware write protection options
  • Deep power-down mode for low-power consumption
  • Fast boot capability for quick system startup

Advantages and Disadvantages

Advantages

  • High-speed data transfer rate enables efficient data storage and retrieval.
  • Non-volatile memory ensures data retention even during power loss.
  • Low power consumption prolongs battery life in portable devices.
  • Compact size allows for integration into space-constrained designs.
  • Wide operating voltage range provides compatibility with various systems.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively higher cost per unit compared to alternative memory solutions.
  • Susceptible to data corruption in case of electrical or physical damage.

Working Principles

IS25LQ010B-JNLE-TR utilizes the Serial Peripheral Interface (SPI) protocol to communicate with the host device. It stores data in a series of memory cells, which can be individually erased or programmed. The SPI interface facilitates high-speed data transfer between the host and the memory chip.

Detailed Application Field Plans

IS25LQ010B-JNLE-TR finds applications in various electronic devices, including but not limited to: - Microcontrollers - Digital cameras - Set-top boxes - Smart home devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to IS25LQ010B-JNLE-TR include: - W25Q16JVZPIQ (Winbond Electronics) - S25FL128SAGMFI011 (Cypress Semiconductor) - MX25L6433FM2I-08G (Macronix International)

These alternative models offer similar functionality and specifications, providing options for different design requirements.

Word count: 486 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של IS25LQ010B-JNLE-TR בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of IS25LQ010B-JNLE-TR in technical solutions:

  1. Question: What is IS25LQ010B-JNLE-TR?
    Answer: IS25LQ010B-JNLE-TR is a specific model of Serial NOR Flash memory chip manufactured by Integrated Silicon Solution Inc. It offers 1Mb (128K x 8) of non-volatile storage.

  2. Question: What are the key features of IS25LQ010B-JNLE-TR?
    Answer: Some key features of IS25LQ010B-JNLE-TR include high-speed read and write operations, low power consumption, wide operating voltage range, and small form factor.

  3. Question: What are the typical applications of IS25LQ010B-JNLE-TR?
    Answer: IS25LQ010B-JNLE-TR is commonly used in various technical solutions such as embedded systems, consumer electronics, industrial automation, automotive applications, and IoT devices.

  4. Question: How fast is the data transfer rate of IS25LQ010B-JNLE-TR?
    Answer: IS25LQ010B-JNLE-TR supports high-speed SPI (Serial Peripheral Interface) communication, allowing for fast data transfer rates up to 104 MHz.

  5. Question: Can IS25LQ010B-JNLE-TR be easily integrated into existing designs?
    Answer: Yes, IS25LQ010B-JNLE-TR is designed to be compatible with standard SPI interfaces, making it relatively easy to integrate into existing designs without major modifications.

  6. Question: What is the operating voltage range of IS25LQ010B-JNLE-TR?
    Answer: IS25LQ010B-JNLE-TR operates within a wide voltage range of 2.7V to 3.6V, making it suitable for various power supply configurations.

  7. Question: Does IS25LQ010B-JNLE-TR support hardware and software write protection?
    Answer: Yes, IS25LQ010B-JNLE-TR provides both hardware and software write protection features to prevent accidental or unauthorized modifications to the stored data.

  8. Question: Can IS25LQ010B-JNLE-TR withstand harsh environmental conditions?
    Answer: Yes, IS25LQ010B-JNLE-TR is designed to operate reliably in a wide temperature range (-40°C to +85°C) and can withstand mechanical stress and vibrations.

  9. Question: Is IS25LQ010B-JNLE-TR compatible with other SPI devices?
    Answer: Yes, IS25LQ010B-JNLE-TR is compatible with other SPI devices, allowing for easy integration with microcontrollers, sensors, and other components in a system.

  10. Question: Are there any specific programming requirements for IS25LQ010B-JNLE-TR?
    Answer: IS25LQ010B-JNLE-TR requires specific commands and protocols for programming and erasing operations, which are detailed in the datasheet provided by the manufacturer.