ISL84523IBZ belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for signal switching and amplification.
ISL84523IBZ is available in a small outline package (SOIC) with 8 pins.
The essence of ISL84523IBZ lies in its ability to efficiently switch and amplify signals in electronic devices.
This product is typically packaged in reels or tubes, with quantities varying based on customer requirements.
ISL84523IBZ has the following pin configuration:
ISL84523IBZ operates by receiving control signals at the IN1 and IN2 pins, which determine the state of the switch. When a control signal is applied, the corresponding NO (Normally Open) pin connects to the COM (Common) pin, allowing the signal to pass through.
ISL84523IBZ finds applications in various electronic devices, including but not limited to:
These alternative models offer similar functionality and can be chosen based on specific design requirements.
Word count: 346 words
Sure! Here are 10 common questions and answers related to the application of ISL84523IBZ in technical solutions:
Q: What is ISL84523IBZ? A: ISL84523IBZ is a dual-channel, bidirectional, high-speed, I2C bus buffer with rise time accelerators.
Q: What is the purpose of ISL84523IBZ? A: ISL84523IBZ is designed to improve signal integrity and data transmission over long distances in I2C bus applications.
Q: What is the maximum operating voltage for ISL84523IBZ? A: The maximum operating voltage for ISL84523IBZ is 5.5V.
Q: Can ISL84523IBZ be used as a level shifter? A: Yes, ISL84523IBZ can be used as a level shifter to convert logic levels between different voltage domains.
Q: What is the maximum data rate supported by ISL84523IBZ? A: ISL84523IBZ supports a maximum data rate of 1MHz.
Q: Does ISL84523IBZ have built-in ESD protection? A: Yes, ISL84523IBZ has built-in ESD protection up to ±15kV (Human Body Model).
Q: Can ISL84523IBZ be used in automotive applications? A: Yes, ISL84523IBZ is qualified for automotive applications and meets AEC-Q100 Grade 1 standards.
Q: How many channels does ISL84523IBZ have? A: ISL84523IBZ has two bidirectional channels, allowing it to buffer two separate I2C buses.
Q: What is the operating temperature range for ISL84523IBZ? A: The operating temperature range for ISL84523IBZ is -40°C to +125°C.
Q: Does ISL84523IBZ require external pull-up resistors? A: Yes, ISL84523IBZ requires external pull-up resistors on the SDA and SCL lines for proper I2C bus operation.
Please note that these answers are general and may vary depending on the specific application and requirements.