ISL32273EFVZ-T belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for signal transmission and reception.
ISL32273EFVZ-T is available in a small form factor package, such as a 20-pin TSSOP (Thin Shrink Small Outline Package).
The essence of ISL32273EFVZ-T lies in its ability to provide reliable and efficient signal communication between different components in electronic systems.
ISL32273EFVZ-T is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
The pin configuration of ISL32273EFVZ-T is as follows:
Pin 1: VCC
Pin 2: GND
Pin 3: TX1
Pin 4: RX1
Pin 5: DE
Pin 6: RE
Pin 7: RS-485 Output A
Pin 8: RS-485 Output B
Pin 9: RS-485 Input A
Pin 10: RS-485 Input B
Pin 11: NC
Pin 12: NC
Pin 13: NC
Pin 14: NC
Pin 15: NC
Pin 16: NC
Pin 17: NC
Pin 18: NC
Pin 19: NC
Pin 20: NC
ISL32273EFVZ-T is designed to facilitate communication between different components in electronic systems using the RS-485/RS-422 protocol. It operates by converting the electrical signals from the transmitting device into a format suitable for long-distance transmission over twisted-pair cables. The receiver then converts the received signals back into their original form for further processing.
ISL32273EFVZ-T finds applications in various fields, including:
Some alternative models that can be considered as alternatives to ISL32273EFVZ-T are:
These models offer similar functionality and can be used as replacements depending on specific requirements.
In conclusion, ISL32273EFVZ-T is an integrated circuit commonly used for signal transmission and reception in electronic devices. It offers high-speed data transmission, low power consumption, and robust ESD protection. With its wide operating voltage range and small form factor package, it is suitable for various applications in industrial automation, building automation, and more. While it has some limitations, there are alternative models available to meet specific needs.
Sure! Here are 10 common questions and answers related to the application of ISL32273EFVZ-T in technical solutions:
Question: What is ISL32273EFVZ-T?
Answer: ISL32273EFVZ-T is a high-speed, dual-channel RS-232 transceiver IC.
Question: What is the operating voltage range of ISL32273EFVZ-T?
Answer: The operating voltage range of ISL32273EFVZ-T is from 3.0V to 5.5V.
Question: What is the data rate supported by ISL32273EFVZ-T?
Answer: ISL32273EFVZ-T supports data rates up to 1Mbps.
Question: Can ISL32273EFVZ-T be used in industrial applications?
Answer: Yes, ISL32273EFVZ-T is suitable for industrial applications due to its wide operating temperature range (-40°C to +85°C) and robustness.
Question: Does ISL32273EFVZ-T support automatic power-down mode?
Answer: Yes, ISL32273EFVZ-T features an automatic power-down mode that reduces power consumption when not actively transmitting or receiving data.
Question: Can ISL32273EFVZ-T be used with both 3.3V and 5V microcontrollers?
Answer: Yes, ISL32273EFVZ-T is compatible with both 3.3V and 5V microcontrollers.
Question: Does ISL32273EFVZ-T have built-in ESD protection?
Answer: Yes, ISL32273EFVZ-T has ±15kV ESD protection on the RS-232 pins.
Question: Can ISL32273EFVZ-T be used in battery-powered applications?
Answer: Yes, ISL32273EFVZ-T has low power consumption and can be used in battery-powered applications.
Question: Is ISL32273EFVZ-T RoHS compliant?
Answer: Yes, ISL32273EFVZ-T is RoHS compliant, ensuring it meets environmental regulations.
Question: What package does ISL32273EFVZ-T come in?
Answer: ISL32273EFVZ-T is available in a 20-lead TSSOP package.
Please note that these answers are general and may vary depending on the specific application and requirements.