Intersil
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
ICL3232EIV-20
צפה בפרטים DataSheets

ICL3232EIV-20

Product Overview

Category

The ICL3232EIV-20 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for signal conversion and transmission in various electronic devices.

Characteristics

  • Voltage Supply: 3V to 5.5V
  • Data Rate: Up to 1Mbps
  • Number of Channels: 4
  • Interface Type: RS232
  • Operating Temperature Range: -40°C to +85°C

Package

The ICL3232EIV-20 is available in a 16-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of the ICL3232EIV-20 lies in its ability to provide reliable and efficient signal conversion between RS232 voltage levels and logic-level signals.

Packaging/Quantity

The ICL3232EIV-20 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage Range: 3V to 5.5V
  • Input High Threshold Voltage: 2.4V (min), 5.5V (max)
  • Input Low Threshold Voltage: -0.3V (min), 0.8V (max)
  • Output High Voltage: 3.7V (min), VCC-0.6V (max)
  • Output Low Voltage: -0.3V (min), 0.3V (max)
  • Maximum Data Rate: 1Mbps

Detailed Pin Configuration

The ICL3232EIV-20 has a total of 16 pins, which are assigned specific functions as follows:

  1. VCC - Power supply voltage input
  2. R1IN - Receiver 1 input
  3. R1OUT - Receiver 1 output
  4. R2IN - Receiver 2 input
  5. R2OUT - Receiver 2 output
  6. T2IN - Transmitter 2 input
  7. T2OUT - Transmitter 2 output
  8. GND - Ground
  9. T1OUT - Transmitter 1 output
  10. T1IN - Transmitter 1 input
  11. R3IN - Receiver 3 input
  12. R3OUT - Receiver 3 output
  13. R4IN - Receiver 4 input
  14. R4OUT - Receiver 4 output
  15. T4OUT - Transmitter 4 output
  16. T4IN - Transmitter 4 input

Functional Features

  • RS232 Voltage Level Conversion: The ICL3232EIV-20 provides bidirectional voltage level conversion between RS232 signals and logic-level signals.
  • ESD Protection: This IC incorporates built-in electrostatic discharge (ESD) protection, ensuring robustness against transient voltage spikes.
  • Low Power Consumption: The ICL3232EIV-20 is designed to operate with low power consumption, making it suitable for battery-powered devices.
  • Wide Operating Temperature Range: With an operating temperature range of -40°C to +85°C, this IC can withstand extreme environmental conditions.

Advantages and Disadvantages

Advantages

  • High data rate capability of up to 1Mbps
  • Four independent channels for versatile signal conversion
  • Wide supply voltage range allows compatibility with various systems
  • Built-in ESD protection enhances reliability

Disadvantages

  • Requires external components for complete functionality
  • Limited to RS232 interface type, not compatible with other serial communication standards

Working Principles

The ICL3232EIV-20 operates by converting the voltage levels of incoming RS232 signals to logic-level signals suitable for microcontrollers or other digital devices. It utilizes internal circuitry to handle the voltage conversion and signal conditioning, ensuring reliable data transmission between RS232 devices and logic-level systems.

Detailed Application Field Plans

The ICL3232EIV-20 finds applications in various fields, including but not limited to: - Industrial automation - Telecommunications - Consumer electronics - Medical devices - Automotive systems

In industrial automation, it can be used for communication between PLCs (Programmable Logic Controllers) and computer systems. In telecommunications, it enables data exchange between modems and routers. In consumer electronics, it facilitates connectivity between microcontrollers and display modules. In medical devices, it allows communication between monitoring equipment and central processing units. In automotive systems, it enables data transfer between onboard computers and diagnostic tools.

Detailed and Complete Alternative Models

  1. MAX3232 - Manufactured by Maxim Integrated, this IC offers similar functionality to the ICL3232EIV-20 with a slightly different pin configuration.
  2. SP3232 - Produced by Exar Corporation, this IC is another alternative that provides RS232 voltage level conversion with comparable specifications.
  3. ADM320

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של ICL3232EIV-20 בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of ICL3232EIV-20 in technical solutions:

  1. Q: What is the ICL3232EIV-20? A: The ICL3232EIV-20 is a quad-channel RS-232 line driver/receiver IC that operates at a maximum data rate of 120kbps.

  2. Q: What are the key features of the ICL3232EIV-20? A: The key features include low power consumption, wide supply voltage range (3V to 5.5V), ESD protection, and compatibility with various logic levels.

  3. Q: How can I use the ICL3232EIV-20 in my design? A: The ICL3232EIV-20 can be used to interface microcontrollers, DSPs, or other devices with RS-232 serial communication ports.

  4. Q: Can the ICL3232EIV-20 handle both transmit and receive signals? A: Yes, the ICL3232EIV-20 has four channels, each capable of transmitting and receiving RS-232 signals.

  5. Q: What is the maximum distance over which the ICL3232EIV-20 can transmit RS-232 signals? A: The maximum distance depends on factors like cable quality and baud rate, but typically it can transmit signals up to 50 feet (15 meters).

  6. Q: Does the ICL3232EIV-20 require external components for operation? A: Yes, the ICL3232EIV-20 requires external capacitors for charge pump operation and bypass capacitors for stability.

  7. Q: Can the ICL3232EIV-20 operate with a single power supply? A: Yes, the ICL3232EIV-20 can operate with a single power supply, typically in the range of 3V to 5.5V.

  8. Q: Is the ICL3232EIV-20 compatible with both 3.3V and 5V logic levels? A: Yes, the ICL3232EIV-20 is compatible with both 3.3V and 5V logic levels, making it suitable for a wide range of applications.

  9. Q: Does the ICL3232EIV-20 provide any protection against electrostatic discharge (ESD)? A: Yes, the ICL3232EIV-20 provides ±15kV ESD protection on the RS-232 inputs and outputs.

  10. Q: Can I use the ICL3232EIV-20 in industrial environments? A: Yes, the ICL3232EIV-20 is designed to operate reliably in industrial environments, with a temperature range of -40°C to +85°C.

Please note that these answers are general and may vary depending on specific design requirements and application scenarios.