התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
EP2C35F484C8N

EP2C35F484C8N

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Programmable Logic Device (PLD)
  • Characteristics: High-performance, low-power consumption
  • Package: 484-pin FineLine BGA (Ball Grid Array)
  • Essence: Field-Programmable Gate Array (FPGA)
  • Packaging/Quantity: Tray, 1 piece per tray

Specifications

  • Logic Elements: 33,216
  • RAM Bits: 1,638,400
  • Maximum User I/Os: 317
  • Operating Voltage: 1.2V
  • Speed Grade: -8
  • Operating Temperature: -40°C to +100°C

Detailed Pin Configuration

The EP2C35F484C8N has a total of 484 pins, each serving a specific purpose in the circuit. The pin configuration is as follows:

  • Pins 1-20: Ground (GND)
  • Pins 21-40: Power Supply (VCC)
  • Pins 41-80: General Purpose Input/Output (GPIO)
  • Pins 81-120: Clock Inputs (CLK)
  • Pins 121-160: Dedicated Input/Output (IO)
  • Pins 161-200: Configuration Interface (CFG)
  • Pins 201-240: JTAG Interface (JTAG)
  • Pins 241-280: Special Function Pins (SFP)
  • Pins 281-320: Differential Input/Output (DIFF_IO)
  • Pins 321-360: Analog-to-Digital Converter (ADC)
  • Pins 361-400: Digital-to-Analog Converter (DAC)
  • Pins 401-440: Memory Interface (MEM)
  • Pins 441-480: System Management (SYS)
  • Pins 481-484: Not Connected (NC)

Functional Features

  • High logic capacity for complex designs
  • Flexible and reprogrammable architecture
  • Low power consumption for energy-efficient operation
  • Fast performance with high-speed interfaces
  • Extensive I/O capabilities for versatile connectivity
  • Built-in memory blocks for efficient data storage
  • Support for various communication protocols

Advantages and Disadvantages

Advantages: 1. Versatile and adaptable for a wide range of applications. 2. Allows for rapid prototyping and development cycles. 3. Offers flexibility in design modifications without hardware changes. 4. High-performance capabilities enable complex computations. 5. Low-power consumption reduces energy costs.

Disadvantages: 1. Higher cost compared to fixed-function integrated circuits. 2. Requires specialized knowledge for programming and configuration. 3. Limited analog functionality compared to dedicated analog ICs. 4. Vulnerable to configuration errors or security breaches.

Working Principles

The EP2C35F484C8N is based on the Field-Programmable Gate Array (FPGA) technology. It consists of an array of configurable logic blocks interconnected through programmable routing resources. The device can be programmed to implement various digital logic functions by configuring the interconnections and functionality of its logic elements.

During operation, the FPGA is configured using a bitstream that defines the desired circuit functionality. This bitstream is loaded into the device's configuration memory, which determines the behavior of the logic elements and interconnects. Once configured, the FPGA operates as a custom digital circuit, executing the desired logic functions.

Detailed Application Field Plans

The EP2C35F484C8N finds applications in various fields, including:

  1. Communications: Used in network routers, switches, and wireless base stations for high-speed data processing and protocol handling.
  2. Industrial Automation: Employed in control systems, robotics, and machine vision applications for real-time data processing and control algorithms.
  3. Automotive: Integrated into automotive electronics for engine control units, advanced driver-assistance systems (ADAS), and infotainment systems.
  4. Aerospace: Utilized in avionics systems for flight control, navigation, and communication functions.
  5. Medical Devices: Incorporated into medical imaging equipment, patient monitoring systems, and laboratory instruments for data processing and analysis.

Detailed and Complete Alternative Models

  1. EP2C20F484C8N: A lower-capacity variant with 20,016 logic elements and 972,800 RAM bits.
  2. EP2C70F484C8N: A higher-capacity variant with 68,416 logic elements and 3,375,360 RAM bits.
  3. EP2C50F484C8N: A mid-range variant with 49,152 logic elements and 2,406,400 RAM bits.
  4. EP2C15F484C8N: A lower-capacity variant with 14,976 logic elements and 729,600 RAM bits.
  5. EP2C30F484C8N: A mid-range variant with 29,952 logic elements and 1,638,400 RAM bits.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של EP2C35F484C8N בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of EP2C35F484C8N in technical solutions:

  1. Q: What is EP2C35F484C8N? A: EP2C35F484C8N is a field-programmable gate array (FPGA) manufactured by Intel. It offers a range of programmable logic and digital signal processing capabilities.

  2. Q: What are the key features of EP2C35F484C8N? A: Some key features include 35,200 logic elements, 1,288 embedded memory blocks, 4 PLLs, and support for various I/O standards.

  3. Q: What are the typical applications of EP2C35F484C8N? A: EP2C35F484C8N is commonly used in applications such as industrial automation, telecommunications, automotive systems, medical devices, and high-performance computing.

  4. Q: How can EP2C35F484C8N be programmed? A: EP2C35F484C8N can be programmed using hardware description languages (HDLs) like VHDL or Verilog, along with design software provided by Intel.

  5. Q: Can EP2C35F484C8N interface with other components or devices? A: Yes, EP2C35F484C8N supports various communication protocols such as UART, SPI, I2C, Ethernet, and PCIe, allowing it to interface with other components or devices.

  6. Q: What tools are available for designing with EP2C35F484C8N? A: Intel provides Quartus Prime software, which includes a complete suite of design tools for designing, simulating, and programming EP2C35F484C8N.

  7. Q: Can EP2C35F484C8N be reprogrammed after deployment? A: Yes, EP2C35F484C8N is a reprogrammable FPGA, allowing for updates or modifications to the design even after it has been deployed in a system.

  8. Q: What are the power requirements for EP2C35F484C8N? A: The power requirements vary depending on the specific design and usage scenario. It is recommended to refer to the datasheet and design guidelines provided by Intel.

  9. Q: Are there any limitations or considerations when using EP2C35F484C8N? A: Some considerations include power consumption, heat dissipation, I/O voltage levels, timing constraints, and resource utilization. These should be carefully evaluated during the design process.

  10. Q: Where can I find additional resources and support for EP2C35F484C8N? A: Intel provides comprehensive documentation, application notes, reference designs, and an online community forum where users can seek help and share knowledge about EP2C35F484C8N.

Please note that the answers provided here are general and may vary based on specific design requirements and the latest information available from Intel.