IRGH4610DPBF
Product Overview
Category: Power Semiconductor
Use: High power switching applications
Characteristics: Fast switching, high voltage capability
Package: TO-247AC
Essence: Power MOSFET
Packaging/Quantity: Tube/50 units
Specifications
- Voltage - Rated: 100V
- Current - Non-Continuous (per On-State Current): 75A
- Current - Continuous Drain (Id) @ 25°C: 96A
- Rds On (Max) @ Id, Vgs: 9.5 mOhm @ 48A, 10V
- Vgs(th) (Max) @ Id: 4V @ 250µA
- Gate Charge (Qg) @ Vgs: 160nC @ 10V
- Input Capacitance (Ciss) @ Vds: 5200pF @ 50V
- Power Dissipation (Max): 310W
Detailed Pin Configuration
- Gate
- Drain
- Source
Functional Features
- Fast switching speed
- Low on-state resistance
- High input capacitance
- Low gate threshold voltage
Advantages and Disadvantages
Advantages: - High voltage capability - Low conduction losses - Suitable for high power applications
Disadvantages: - High input capacitance may require additional drive circuitry - Higher cost compared to lower power devices
Working Principles
The IRGH4610DPBF is a power MOSFET designed for high power switching applications. When a sufficient voltage is applied to the gate terminal, it allows current to flow between the drain and source terminals, effectively acting as a switch.
Detailed Application Field Plans
The IRGH4610DPBF is commonly used in: - Motor drives - Power supplies - Inverters - Welding equipment - Induction heating systems
Detailed and Complete Alternative Models
- IRGP4063DPBF
- IRGS4610DPBF
- IRG4PH40UDPBF
- IRG4BC30UDPBF
This completes the English editing encyclopedia entry structure for IRGH4610DPBF, providing comprehensive information about the product's category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של IRGH4610DPBF בפתרונות טכניים
What is IRGH4610DPBF?
- IRGH4610DPBF is a high power insulated gate bipolar transistor (IGBT) designed for various technical solutions requiring high power switching.
What are the key features of IRGH4610DPBF?
- The key features include a high current capability, low saturation voltage, and fast switching speed, making it suitable for high power applications.
What are the typical applications of IRGH4610DPBF?
- Typical applications include motor drives, inverters, UPS systems, and welding equipment where high power switching is required.
What is the maximum voltage and current rating of IRGH4610DPBF?
- The maximum voltage rating is typically around 1200V, and the current rating can be up to several hundred amperes, depending on the specific application.
How does IRGH4610DPBF compare to other IGBTs in its class?
- IRGH4610DPBF offers a good balance of high current capability, low saturation voltage, and fast switching speed compared to other IGBTs in its class.
What are the thermal considerations when using IRGH4610DPBF?
- Proper heat sinking and thermal management are crucial due to the high power dissipation of IRGH4610DPBF during operation.
Can IRGH4610DPBF be used in parallel configurations for higher power applications?
- Yes, IRGH4610DPBF can be used in parallel configurations to increase the overall current handling capability in high power applications.
Are there any specific driver requirements for IRGH4610DPBF?
- It is recommended to use a gate driver with appropriate voltage and current capabilities to ensure efficient and reliable switching of IRGH4610DPBF.
What are the common protection measures for IRGH4610DPBF in circuit design?
- Common protection measures include overcurrent protection, overvoltage protection, and temperature monitoring to ensure safe and reliable operation.
Where can I find detailed technical specifications and application notes for IRGH4610DPBF?
- Detailed technical specifications and application notes can be found in the product datasheet provided by the manufacturer or on their official website.