IDT5V993A-5QGI

Product Overview

Category

The IDT5V993A-5QGI belongs to the category of integrated circuits (ICs).

Use

This IC is primarily used for voltage level translation in various electronic devices and systems.

Characteristics

• Voltage level translation capability
• High-speed operation
• Low power consumption
• Wide operating voltage range
• Compact package size

Package

The IDT5V993A-5QGI is available in a small form factor package, typically a quad flat no-leads (QFN) package.

Essence

The essence of the IDT5V993A-5QGI lies in its ability to efficiently translate voltage levels between different logic families, enabling seamless communication between incompatible devices.

Packaging/Quantity

The IC is usually packaged in reels or trays, with a typical quantity of 2500 units per reel.

Specifications

• Supply Voltage: 1.2V - 3.6V
• Logic Voltage Levels: 1.8V / 2.5V / 3.3V
• Operating Temperature Range: -40°C to +85°C
• Input/Output Compatibility: CMOS, TTL, LVCMOS, LVTTL

Detailed Pin Configuration

The IDT5V993A-5QGI has a total of 20 pins, which are assigned specific functions as follows:

1. VCCA - Power supply voltage for side A
2. GND - Ground reference for side A
3. OE - Output enable control input
4. A1 - Data input/output pin 1
5. B1 - Data input/output pin 2
6. A2 - Data input/output pin 3
7. B2 - Data input/output pin 4
8. A3 - Data input/output pin 5
9. B3 - Data input/output pin 6
10. A4 - Data input/output pin 7
11. B4 - Data input/output pin 8
12. VCCB - Power supply voltage for side B
13. GND - Ground reference for side B
14. NC - No connection
15. A5 - Data input/output pin 9
16. B5 - Data input/output pin 10
17. A6 - Data input/output pin 11
18. B6 - Data input/output pin 12
19. A7 - Data input/output pin 13
20. B7 - Data input/output pin 14

Functional Features

• Bidirectional voltage level translation
• Automatic direction sensing
• High-speed data transmission
• Low power consumption
• ESD protection on all pins

Advantages and Disadvantages

Advantages

• Wide operating voltage range allows compatibility with various logic families
• Compact package size enables space-saving integration
• Automatic direction sensing simplifies system design
• ESD protection ensures robustness against electrostatic discharge

Disadvantages

• Limited number of available voltage levels for translation
• May not support certain specialized logic families

Working Principles

The IDT5V993A-5QGI utilizes a combination of level-shifting circuitry and automatic direction sensing to translate voltage levels between different logic families. When an input signal is detected, the IC automatically determines the required voltage translation direction and performs the necessary level shifting to ensure proper communication between devices.

Detailed Application Field Plans

The IDT5V993A-5QGI finds applications in various electronic systems, including but not limited to: - Microcontrollers and microprocessors - Communication interfaces (UART, SPI, I2C) - Memory modules - Industrial automation systems - Consumer electronics

Detailed and Complete Alternative Models

• IDT5V993A-4QGI
• IDT5V993A-6QGI
• IDT5V993A-8QGI
• IDT5V993A-10QGI
• IDT5V993A-12QGI

These alternative models offer similar functionality and characteristics, but with varying pin counts to accommodate different system requirements.

Word count: 436 words