IDT, Integrated Device Technology Inc
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
8N3QV01EG-0170CDI8
צפה בפרטים DataSheets

8N3QV01EG-0170CDI8

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Timing and Frequency Control
  • Characteristics: High precision, low power consumption
  • Package: QFN (Quad Flat No-leads)
  • Essence: Clock Generator
  • Packaging/Quantity: Tape and Reel, 250 units per reel

Specifications

  • Supply Voltage: 1.8V to 3.3V
  • Frequency Range: 10MHz to 200MHz
  • Output Type: Differential
  • Operating Temperature Range: -40°C to +85°C
  • Phase Jitter: <1 ps RMS

Detailed Pin Configuration

The 8N3QV01EG-0170CDI8 IC has a total of 16 pins arranged as follows:

Pin 1: VDD Pin 2: GND Pin 3: OUT0_N Pin 4: OUT0_P Pin 5: OUT1_N Pin 6: OUT1_P Pin 7: OE# Pin 8: SEL0 Pin 9: SEL1 Pin 10: SEL2 Pin 11: SEL3 Pin 12: SDA Pin 13: SCL Pin 14: NC Pin 15: NC Pin 16: VDD

Functional Features

  • Clock generation with selectable frequencies
  • Low phase jitter for accurate timing applications
  • Differential output for noise immunity
  • On-board I2C interface for easy configuration
  • Output enable pin for power-saving mode

Advantages and Disadvantages

Advantages: - High precision timing control - Wide operating voltage range - Low power consumption - Small form factor package

Disadvantages: - Limited frequency range compared to some other models - Requires I2C interface for configuration

Working Principles

The 8N3QV01EG-0170CDI8 is a clock generator IC that generates precise timing signals for various applications. It operates by utilizing an internal oscillator and frequency dividers to generate the desired output frequency. The on-board I2C interface allows users to configure the IC with ease, enabling them to select the desired output frequency and other parameters.

Detailed Application Field Plans

The 8N3QV01EG-0170CDI8 IC finds applications in various fields where accurate timing control is crucial. Some of the potential application areas include: - Telecommunications equipment - Networking devices - Data storage systems - Industrial automation - Test and measurement instruments

Detailed and Complete Alternative Models

  • 8N3QV01EG-0150CDI8: Similar specifications but with a lower frequency range (10MHz to 150MHz)
  • 8N3QV01EG-0200CDI8: Similar specifications but with a higher frequency range (10MHz to 200MHz)
  • 8N3QV01EG-0170CDI6: Similar specifications but with a different package (SOIC instead of QFN)

(Note: These alternative models are provided for reference purposes and may have slight variations in features and pin configurations.)

This concludes the encyclopedia entry for the 8N3QV01EG-0170CDI8 IC, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של 8N3QV01EG-0170CDI8 בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of 8N3QV01EG-0170CDI8 in technical solutions:

  1. Question: What is the purpose of the 8N3QV01EG-0170CDI8 component?
    Answer: The 8N3QV01EG-0170CDI8 is a specific electronic component used for various technical applications.

  2. Question: What is the voltage rating of the 8N3QV01EG-0170CDI8?
    Answer: The voltage rating of the 8N3QV01EG-0170CDI8 is typically specified in its datasheet, which should be consulted for accurate information.

  3. Question: Can the 8N3QV01EG-0170CDI8 be used in high-temperature environments?
    Answer: The operating temperature range of the 8N3QV01EG-0170CDI8 should be checked in its datasheet to determine if it is suitable for high-temperature applications.

  4. Question: What are the typical applications of the 8N3QV01EG-0170CDI8?
    Answer: The 8N3QV01EG-0170CDI8 can be used in various technical solutions such as power management, signal conditioning, or voltage regulation.

  5. Question: Is the 8N3QV01EG-0170CDI8 compatible with other electronic components?
    Answer: The compatibility of the 8N3QV01EG-0170CDI8 with other components depends on the specific requirements and specifications of the overall system design.

  6. Question: Does the 8N3QV01EG-0170CDI8 require any external components for proper operation?
    Answer: The datasheet of the 8N3QV01EG-0170CDI8 should provide information on any required external components or recommended circuit configurations.

  7. Question: What is the power consumption of the 8N3QV01EG-0170CDI8?
    Answer: The power consumption of the 8N3QV01EG-0170CDI8 can vary depending on its operating conditions and load requirements, which should be considered during system design.

  8. Question: Can the 8N3QV01EG-0170CDI8 handle high current loads?
    Answer: The current handling capability of the 8N3QV01EG-0170CDI8 should be checked in its datasheet to ensure it meets the requirements of the specific application.

  9. Question: Is the 8N3QV01EG-0170CDI8 suitable for battery-powered devices?
    Answer: The suitability of the 8N3QV01EG-0170CDI8 for battery-powered devices depends on factors such as its power efficiency and voltage range compatibility with the battery.

  10. Question: Are there any known limitations or considerations when using the 8N3QV01EG-0170CDI8?
    Answer: It is important to review the datasheet and application notes of the 8N3QV01EG-0170CDI8 to understand any limitations, thermal considerations, or specific design guidelines that may apply.

Please note that the answers provided here are general and may vary based on the specific datasheet and application requirements of the 8N3QV01EG-0170CDI8 component.