IDT, Integrated Device Technology Inc
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
74FCT163373CPAG8
צפה בפרטים DataSheets

Encyclopedia Entry: 74FCT163373CPAG8

Product Overview

Category

The 74FCT163373CPAG8 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronic systems for data storage and transfer applications.

Characteristics

  • The 74FCT163373CPAG8 is a high-speed, 16-bit transparent latch with 3-state outputs.
  • It operates on a wide voltage range, typically between 4.5V and 5.5V.
  • This IC offers low power consumption and high noise immunity.
  • It is designed to be compatible with various logic families, including TTL and CMOS.

Package

The 74FCT163373CPAG8 is available in a 48-pin plastic leaded chip carrier (PLCC) package.

Essence

The essence of this IC lies in its ability to store and transfer digital data efficiently within electronic systems.

Packaging/Quantity

Typically, the 74FCT163373CPAG8 is sold in reels containing multiple units. The exact quantity may vary depending on the supplier.

Specifications

  • Number of Bits: 16
  • Logic Family: FCT
  • Output Type: 3-State
  • Supply Voltage Range: 4.5V - 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: PLCC-48

Detailed Pin Configuration

The 74FCT163373CPAG8 has a total of 48 pins. Here is the detailed pin configuration:

  1. OE (Output Enable) 1
  2. I/O0 (Data Input/Output) 0
  3. I/O1 (Data Input/Output) 1
  4. GND (Ground)
  5. I/O2 (Data Input/Output) 2
  6. I/O3 (Data Input/Output) 3
  7. VCC (Supply Voltage)
  8. I/O4 (Data Input/Output) 4
  9. I/O5 (Data Input/Output) 5
  10. I/O6 (Data Input/Output) 6
  11. I/O7 (Data Input/Output) 7
  12. I/O8 (Data Input/Output) 8
  13. I/O9 (Data Input/Output) 9
  14. I/O10 (Data Input/Output) 10
  15. I/O11 (Data Input/Output) 11
  16. I/O12 (Data Input/Output) 12
  17. I/O13 (Data Input/Output) 13
  18. I/O14 (Data Input/Output) 14
  19. I/O15 (Data Input/Output) 15
  20. GND (Ground)
  21. D0 (Data Input) 0
  22. D1 (Data Input) 1
  23. D2 (Data Input) 2
  24. D3 (Data Input) 3
  25. D4 (Data Input) 4
  26. D5 (Data Input) 5
  27. D6 (Data Input) 6
  28. D7 (Data Input) 7
  29. GND (Ground)
  30. D8 (Data Input) 8
  31. D9 (Data Input) 9
  32. D10 (Data Input) 10
  33. D11 (Data Input) 11
  34. D12 (Data Input) 12
  35. D13 (Data Input) 13
  36. D14 (Data Input) 14
  37. D15 (Data Input) 15
  38. GND (Ground)
  39. LE (Latch Enable)
  40. CLK (Clock Input)
  41. GND (Ground)
  42. OE (Output Enable) 2
  43. I/O16 (Data Input/Output) 16
  44. I/O17 (Data Input/Output) 17
  45. VCC (Supply Voltage)
  46. I/O18 (Data Input/Output) 18
  47. I/O19 (Data Input/Output) 19
  48. I/O20 (Data Input/Output) 20

Functional Features

The 74FCT163373CPAG8 offers the following functional features:

  • Transparent latch operation: The IC allows data to pass through when the latch enable (LE) signal is active.
  • 3-state outputs: The outputs can be put in a high-impedance state, allowing multiple devices to share a common bus.
  • High-speed operation: This IC is designed for fast data transfer, making it suitable for time-critical applications.
  • Wide voltage range compatibility: It can work with various logic families, providing flexibility in system design.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של 74FCT163373CPAG8 בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of 74FCT163373CPAG8 in technical solutions:

  1. Q: What is the 74FCT163373CPAG8? A: The 74FCT163373CPAG8 is a 16-bit transparent latch with 3-state outputs, commonly used in digital systems.

  2. Q: What is the purpose of a transparent latch? A: A transparent latch allows data to pass through when its enable signal is active, providing a way to store and transfer data in a digital circuit.

  3. Q: How many bits can the 74FCT163373CPAG8 handle? A: The 74FCT163373CPAG8 can handle 16 bits of data.

  4. Q: What does "3-state outputs" mean? A: 3-state outputs allow the outputs of the latch to be in three different states: high, low, or high impedance (disconnected).

  5. Q: What voltage levels does the 74FCT163373CPAG8 support? A: The 74FCT163373CPAG8 supports both TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor) voltage levels.

  6. Q: Can I use multiple 74FCT163373CPAG8 latches together? A: Yes, you can cascade multiple 74FCT163373CPAG8 latches to increase the number of bits that can be handled.

  7. Q: How do I control the enable signal of the 74FCT163373CPAG8? A: The enable signal is controlled by connecting it to a control signal from your digital system, such as a microcontroller or a logic gate.

  8. Q: What is the maximum clock frequency supported by the 74FCT163373CPAG8? A: The maximum clock frequency depends on various factors, including the supply voltage and temperature, but it typically supports high-speed operation in the MHz range.

  9. Q: Can I use the 74FCT163373CPAG8 for bidirectional data transfer? A: No, the 74FCT163373CPAG8 is a unidirectional latch, meaning it can only handle data in one direction.

  10. Q: Are there any specific precautions to consider when using the 74FCT163373CPAG8? A: Yes, it is important to ensure proper power supply decoupling, observe voltage level compatibility, and follow the recommended operating conditions mentioned in the datasheet to ensure reliable operation.

Please note that these answers are general and may vary depending on the specific application and requirements. Always refer to the datasheet and consult with technical experts for accurate information.