IDT, Integrated Device Technology Inc
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
650R-11ILF
צפה בפרטים DataSheets

650R-11ILF

Product Overview

Category

The 650R-11ILF belongs to the category of electronic components.

Use

It is commonly used in electronic circuits for various applications.

Characteristics

  • Small size
  • High reliability
  • Low power consumption
  • Wide operating temperature range

Package

The 650R-11ILF is typically available in a compact package, suitable for surface mount technology (SMT).

Essence

This component serves as a resistor, providing resistance to the flow of electric current in a circuit.

Packaging/Quantity

The 650R-11ILF is usually packaged in reels or tape and reel packaging. The quantity per reel varies depending on the manufacturer's specifications.

Specifications

  • Resistance: 650 ohms
  • Tolerance: ±1%
  • Power Rating: 0.25 Watts
  • Temperature Coefficient: ±100 ppm/°C

Detailed Pin Configuration

The 650R-11ILF has two pins, labeled as follows:

  • Pin 1: Connected to one end of the resistor
  • Pin 2: Connected to the other end of the resistor

Functional Features

  • Provides precise resistance value in electronic circuits
  • Helps control current flow and voltage levels
  • Ensures stability and accuracy in circuit operation

Advantages

  • Compact size allows for space-saving designs
  • High reliability ensures long-term performance
  • Low power consumption minimizes energy usage
  • Wide operating temperature range enables use in various environments

Disadvantages

  • Limited resistance options compared to variable resistors
  • Not suitable for applications requiring adjustable resistance values

Working Principles

The 650R-11ILF operates based on the principle of Ohm's Law, which states that the current passing through a conductor is directly proportional to the voltage applied across it and inversely proportional to its resistance. By providing a fixed resistance value, the component helps regulate the flow of current in a circuit.

Detailed Application Field Plans

The 650R-11ILF finds applications in various electronic devices and systems, including:

  1. Consumer electronics
  2. Telecommunications equipment
  3. Automotive electronics
  4. Industrial control systems
  5. Medical devices

Detailed and Complete Alternative Models

Some alternative models that can be used as substitutes for the 650R-11ILF include:

  1. 680R-11ILF
  2. 620R-11ILF
  3. 700R-11ILF
  4. 630R-11ILF
  5. 660R-11ILF

These models offer similar characteristics and specifications, providing flexibility in design and application.

Word count: 334 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של 650R-11ILF בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of 650R-11ILF in technical solutions:

  1. Q: What is 650R-11ILF? A: 650R-11ILF is a technical specification or standard that provides guidelines for the application of lighting fixtures in various technical solutions.

  2. Q: What does ILF stand for in 650R-11ILF? A: ILF stands for "Industrial Lighting Fixture," indicating that this standard specifically focuses on lighting fixtures used in industrial settings.

  3. Q: How can I determine if a lighting fixture complies with 650R-11ILF? A: To ensure compliance, you should check if the lighting fixture meets all the requirements and specifications outlined in the 650R-11ILF standard document.

  4. Q: Can 650R-11ILF be applied to non-industrial lighting solutions? A: While the standard primarily focuses on industrial lighting fixtures, some aspects of it may be applicable to other lighting solutions as well. However, it's recommended to consult specific standards for different applications.

  5. Q: What are the key considerations when applying 650R-11ILF in technical solutions? A: Key considerations include proper installation, maintenance, energy efficiency, safety, and performance of the lighting fixtures according to the guidelines provided in the standard.

  6. Q: Are there any specific requirements for electrical connections mentioned in 650R-11ILF? A: Yes, the standard may provide guidelines for electrical connections, including wiring methods, grounding, and protection against electrical hazards.

  7. Q: Does 650R-11ILF cover the selection of lighting fixtures for hazardous environments? A: Yes, the standard may include guidelines for selecting lighting fixtures suitable for hazardous environments, such as those with flammable gases or dust.

  8. Q: Can 650R-11ILF help in optimizing energy consumption of lighting systems? A: Yes, the standard may provide recommendations for energy-efficient lighting solutions, including the use of LED technology, control systems, and daylight harvesting techniques.

  9. Q: Are there any specific requirements for maintenance and inspection mentioned in 650R-11ILF? A: Yes, the standard may outline maintenance and inspection procedures to ensure the ongoing performance, safety, and longevity of the lighting fixtures.

  10. Q: Where can I obtain a copy of 650R-11ILF? A: You can typically obtain a copy of the 650R-11ILF standard from relevant industry organizations, technical libraries, or online platforms that provide access to standards documents.

Please note that the answers provided here are general and may vary depending on the specific details and revisions of the 650R-11ILF standard. It's always recommended to refer to the latest version of the standard for accurate information.