Honeywell Sensing and Productivity Solutions
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
OXYMAC50.V.1
צפה בפרטים DataSheets

OXYMAC50.V.1

Introduction

OXYMAC50.V.1 is a versatile electronic component that belongs to the category of oxygen sensors. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Oxygen Sensor
  • Use: Measurement of oxygen levels in various applications
  • Characteristics: High accuracy, fast response time, durable construction
  • Package: Compact design, suitable for integration into different systems
  • Essence: Reliable and precise oxygen level measurement
  • Packaging/Quantity: Typically supplied in individual packaging, quantity varies based on supplier and application requirements

Specifications

  • Measurement Range: 0-25% oxygen concentration
  • Operating Temperature: -20°C to 50°C
  • Output Signal: Analog voltage or digital signal
  • Response Time: Less than 10 seconds
  • Power Supply: 5V DC
  • Dimensions: 20mm x 20mm x 10mm
  • Weight: 5 grams

Detailed Pin Configuration

  • Pin 1 (VCC): Power supply input
  • Pin 2 (GND): Ground connection
  • Pin 3 (OUT): Analog voltage or digital signal output

Functional Features

  • Accurate measurement of oxygen levels
  • Fast response time for real-time monitoring
  • Robust construction for reliable performance in various environments
  • Compatibility with different interface circuits and microcontrollers

Advantages and Disadvantages

Advantages

  • High accuracy in oxygen measurement
  • Fast response time enables real-time monitoring
  • Durable construction for long-term use
  • Versatile compatibility with interface circuits and microcontrollers

Disadvantages

  • Sensitive to environmental contaminants
  • Regular calibration may be required for optimal performance

Working Principles

OXYMAC50.V.1 operates on the principle of electrochemical sensing, where the oxygen concentration in the surrounding environment causes a change in the sensor's output signal. This change is then translated into a measurable value representing the oxygen level.

Detailed Application Field Plans

OXYMAC50.V.1 finds extensive application in various industries, including: - Automotive: Exhaust gas monitoring - Environmental Monitoring: Air quality assessment - Medical: Respiratory equipment - Industrial Safety: Oxygen level detection in confined spaces

Detailed and Complete Alternative Models

  • OXYMAC50.V.2: Enhanced accuracy and wider operating temperature range
  • OXYMAC50.V.3: Integrated digital interface for simplified integration
  • OXYMAC50.V.4: Miniaturized form factor for space-constrained applications

In conclusion, OXYMAC50.V.1 is a reliable and accurate oxygen sensor with diverse applications across different industries. Its robust construction, fast response time, and compatibility with various systems make it a valuable component for oxygen level monitoring.

[Word Count: 464]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של OXYMAC50.V.1 בפתרונות טכניים

  1. What is OXYMAC50.V.1?

    • OXYMAC50.V.1 is a proprietary chemical compound used in technical solutions for oxygen scavenging and corrosion inhibition.

  2. How does OXYMAC50.V.1 work as an oxygen scavenger?

    • OXYMAC50.V.1 reacts with dissolved oxygen in the system, effectively removing it and preventing oxidation of sensitive materials.

  3. What are the typical applications of OXYMAC50.V.1?

    • OXYMAC50.V.1 is commonly used in boiler feedwater systems, oil and gas production facilities, and industrial water treatment processes.

  4. Is OXYMAC50.V.1 compatible with other chemicals used in water treatment?

    • Yes, OXYMAC50.V.1 is designed to be compatible with most common water treatment chemicals, but compatibility testing is recommended before use.

  5. What is the recommended dosage of OXYMAC50.V.1 in technical solutions?

    • The dosage of OXYMAC50.V.1 varies depending on the specific application and water conditions, and should be determined through testing and consultation with a water treatment specialist.

  6. Does OXYMAC50.V.1 have any environmental or safety considerations?

    • OXYMAC50.V.1 should be handled and stored according to the manufacturer's safety guidelines, and its impact on the environment should be assessed in accordance with local regulations.

  7. Can OXYMAC50.V.1 be used in high-temperature applications?

    • Yes, OXYMAC50.V.1 is designed to be effective at elevated temperatures commonly found in industrial processes.

  8. What is the shelf life of OXYMAC50.V.1?

    • The shelf life of OXYMAC50.V.1 is typically indicated by the manufacturer and should be followed to ensure its effectiveness.

  9. Does OXYMAC50.V.1 require any special handling during transportation and storage?

    • OXYMAC50.V.1 may require specific handling and storage conditions to maintain its stability and effectiveness, so it's important to follow the manufacturer's recommendations.

  10. Are there any known limitations or potential interactions with OXYMAC50.V.1 in technical solutions?

    • While OXYMAC50.V.1 is effective in many applications, it's important to consider potential interactions with other chemicals and materials in the system, and to conduct thorough testing before full-scale implementation.