GeneSiC Semiconductor
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
MUR2X120A02
צפה בפרטים DataSheets

MUR2X120A02

Product Overview

  • Category: Rectifier Diode
  • Use: Rectification of AC to DC current
  • Characteristics: High voltage, high current capability, fast switching speed
  • Package: TO-220AB
  • Essence: Efficient conversion of alternating current to direct current
  • Packaging/Quantity: Typically sold in reels or tubes containing multiple units

Specifications

  • Voltage Rating: 1200V
  • Current Rating: 2A
  • Forward Voltage Drop: 1.2V
  • Reverse Recovery Time: 35ns
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The MUR2X120A02 has a standard TO-220AB package with three pins: Anode, Cathode, and Gate.

Functional Features

  • Fast recovery time
  • Low forward voltage drop
  • High surge current capability

Advantages

  • High efficiency
  • Suitable for high-frequency applications
  • Reliable and durable

Disadvantages

  • Higher cost compared to standard diodes
  • Sensitive to temperature variations

Working Principles

The MUR2X120A02 operates on the principle of rectification, allowing the flow of current in only one direction, converting alternating current into direct current.

Detailed Application Field Plans

This rectifier diode is commonly used in power supplies, inverters, motor drives, and other high-power electronic systems requiring efficient AC to DC conversion.

Detailed and Complete Alternative Models

  • MUR160
  • MUR460
  • MUR860
  • MUR10120

This entry provides comprehensive information about the MUR2X120A02 rectifier diode, including its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של MUR2X120A02 בפתרונות טכניים

  1. What is the MUR2X120A02?

    • The MUR2X120A02 is a dual ultrafast rectifier diode module designed for high voltage, high speed switching applications.

  2. What are the key specifications of the MUR2X120A02?

    • The key specifications include a maximum repetitive reverse voltage of 1200V, average forward current of 2A, and a fast recovery time.

  3. What are the typical applications of the MUR2X120A02?

    • Typical applications include power supplies, inverters, motor drives, and other high voltage, high speed switching circuits.

  4. What are the advantages of using the MUR2X120A02 in technical solutions?

    • The MUR2X120A02 offers low forward voltage drop, high frequency operation, and high reliability, making it suitable for demanding applications.

  5. What is the operating temperature range of the MUR2X120A02?

    • The operating temperature range is typically -55°C to +175°C, allowing for use in a wide range of environments.

  6. Can the MUR2X120A02 be used in parallel for higher current applications?

    • Yes, the MUR2X120A02 can be used in parallel to increase the current handling capability in high power applications.

  7. Does the MUR2X120A02 require a heatsink for thermal management?

    • Depending on the application and power dissipation, a heatsink may be required to ensure proper thermal management.

  8. What are the recommended mounting and soldering techniques for the MUR2X120A02?

    • The module should be mounted on a suitable heatsink using a thermally conductive adhesive or mechanical mounting hardware. Soldering should be done according to recommended guidelines.

  9. Are there any specific considerations for driving the MUR2X120A02 in high frequency applications?

    • Care should be taken to minimize parasitic inductance and capacitance in the layout and connections to ensure optimal performance in high frequency applications.

  10. Where can I find detailed application notes and reference designs for the MUR2X120A02?

    • Detailed application notes and reference designs can be found in the product datasheet, as well as on the manufacturer's website and technical support resources.