GeneSiC Semiconductor
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
MBRT60030
צפה בפרטים DataSheets

MBRT60030

Product Overview

Belongs to: Diode
Category: Rectifier diode
Use: Converts alternating current (AC) to direct current (DC)
Characteristics: High current capability, low forward voltage drop
Package: Through-hole or surface mount
Essence: Efficient rectification of AC to DC
Packaging/Quantity: Typically available in reels or tubes

Specifications

  • Maximum Average Forward Current: 6A
  • Peak Reverse Voltage: 30V
  • Forward Voltage Drop: 0.55V at 3A
  • Reverse Leakage Current: 5µA at 25°C

Detailed Pin Configuration

The MBRT60030 typically has two pins, with the anode connected to the positive terminal and the cathode connected to the negative terminal.

Functional Features

  • High current capability allows for efficient power conversion
  • Low forward voltage drop minimizes power loss
  • Fast switching speed enables rapid response to input changes

Advantages

  • High current capability suitable for various applications
  • Low forward voltage drop reduces power dissipation
  • Fast switching speed enhances efficiency

Disadvantages

  • Limited peak reverse voltage may not be suitable for high voltage applications
  • Higher forward voltage drop compared to some alternative models

Working Principles

The MBRT60030 operates on the principle of rectification, allowing current to flow in only one direction, from the anode to the cathode, when a forward voltage is applied. This enables the conversion of AC to DC.

Detailed Application Field Plans

  • Power supplies
  • Battery chargers
  • LED lighting
  • Motor drives
  • Solar panels

Detailed and Complete Alternative Models

  1. MBR0540: Peak Reverse Voltage: 40V, Forward Voltage Drop: 0.45V at 3A
  2. MBR1060: Peak Reverse Voltage: 60V, Forward Voltage Drop: 0.5V at 3A
  3. MBR2045: Peak Reverse Voltage: 45V, Forward Voltage Drop: 0.55V at 3A

In conclusion, the MBRT60030 rectifier diode offers high current capability and low forward voltage drop, making it suitable for various applications such as power supplies, battery chargers, and LED lighting. However, its limited peak reverse voltage and higher forward voltage drop compared to some alternative models should be considered when selecting a diode for specific applications.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של MBRT60030 בפתרונות טכניים

  1. What is MBRT60030?

    • MBRT60030 is a high-power Schottky rectifier diode commonly used in power supply and voltage regulation applications.

  2. What are the key features of MBRT60030?

    • The key features of MBRT60030 include its high current capability, low forward voltage drop, and fast switching speed.

  3. What are the typical applications of MBRT60030?

    • MBRT60030 is commonly used in power supplies, DC-DC converters, motor control, and reverse polarity protection circuits.

  4. What is the maximum forward voltage of MBRT60030?

    • The maximum forward voltage of MBRT60030 is typically around 0.55V at a forward current of 30A.

  5. What is the maximum reverse voltage of MBRT60030?

    • The maximum reverse voltage of MBRT60030 is 30V.

  6. What is the operating temperature range of MBRT60030?

    • MBRT60030 can operate within a temperature range of -65°C to 175°C.

  7. What is the package type of MBRT60030?

    • MBRT60030 is available in a D²PAK (TO-263) package.

  8. What are the advantages of using MBRT60030 in technical solutions?

    • The advantages of using MBRT60030 include its high efficiency, low power loss, and compact design.

  9. Can MBRT60030 be used in automotive applications?

    • Yes, MBRT60030 is suitable for use in automotive electronics such as engine control units and LED lighting systems.

  10. Where can I find detailed specifications and application notes for MBRT60030?

    • Detailed specifications and application notes for MBRT60030 can be found on the manufacturer's datasheet and website.