התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
FRS-R-3-2/10

FRS-R-3-2/10

Product Overview

Category

The FRS-R-3-2/10 belongs to the category of electrical fuses.

Use

It is used for protecting electrical circuits from overcurrent and short-circuit conditions.

Characteristics

  • Fast-acting
  • High interrupting capacity
  • Compact size

Package

The FRS-R-3-2/10 is typically packaged in a protective casing to prevent damage during transportation and storage.

Essence

The essence of the FRS-R-3-2/10 lies in its ability to provide reliable overcurrent protection in various electrical applications.

Packaging/Quantity

The FRS-R-3-2/10 is usually available in packs of 10 or 20 units, depending on the manufacturer.

Specifications

  • Current Rating: 3.2A
  • Voltage Rating: 250V
  • Interrupting Capacity: 10kA

Detailed Pin Configuration

The FRS-R-3-2/10 features a standard blade-type pin configuration with specific dimensions as per industry standards.

Functional Features

  • Fast response to overcurrent conditions
  • High interrupting capacity to handle short-circuit faults
  • Reliable operation in diverse environmental conditions

Advantages

  • Compact size allows for space-efficient installation
  • High interrupting capacity ensures effective protection
  • Suitable for a wide range of electrical applications

Disadvantages

  • Limited current rating may not be suitable for high-power circuits
  • Replacement may be required after a single fault condition

Working Principles

The FRS-R-3-2/10 operates based on the principle of melting a fusible element when subjected to overcurrent, thereby breaking the circuit and preventing damage to connected equipment.

Detailed Application Field Plans

The FRS-R-3-2/10 is commonly used in: - Residential electrical panels - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

  1. FRS-R-5-2/10 - Higher current rating for heavier loads
  2. FRS-R-2-2/10 - Lower current rating for lighter applications
  3. FRS-R-3-4/10 - Higher interrupting capacity for more demanding environments

In conclusion, the FRS-R-3-2/10 is a fast-acting electrical fuse designed to protect circuits from overcurrent and short-circuit conditions. Its compact size, high interrupting capacity, and versatile application make it a valuable component in various electrical systems. However, users should consider alternative models based on specific current and interrupting capacity requirements.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של FRS-R-3-2/10 בפתרונות טכניים

  1. What is FRS-R-3-2/10?

    • FRS-R-3-2/10 is a technical standard that specifies the requirements for fire-resistant cables used in various applications.
  2. What types of cables are covered by FRS-R-3-2/10?

    • FRS-R-3-2/10 covers fire-resistant cables used for power, control, and instrumentation in industrial, commercial, and residential buildings.
  3. How does FRS-R-3-2/10 define fire resistance for cables?

    • FRS-R-3-2/10 defines fire resistance based on the ability of cables to maintain circuit integrity and functionality during a fire for a specified duration.
  4. What are the testing requirements for cables under FRS-R-3-2/10?

    • Cables must undergo rigorous fire tests to assess their performance in maintaining electrical continuity and insulation integrity during exposure to fire.
  5. Are there specific installation requirements outlined in FRS-R-3-2/10?

    • Yes, FRS-R-3-2/10 provides guidelines for the proper installation and handling of fire-resistant cables to ensure their effectiveness in fire scenarios.
  6. What are the key considerations for selecting FRS-R-3-2/10 compliant cables?

    • When selecting cables, it's important to consider factors such as voltage rating, conductor size, insulation material, and compliance with relevant standards.
  7. Do FRS-R-3-2/10 compliant cables have any limitations or restrictions?

    • FRS-R-3-2/10 compliant cables may have limitations on maximum operating temperature, bending radius, and environmental conditions, which should be carefully considered.
  8. Are there any maintenance requirements for FRS-R-3-2/10 compliant cables?

    • Regular inspection and maintenance of fire-resistant cables are essential to ensure their continued effectiveness in the event of a fire.
  9. What are the benefits of using FRS-R-3-2/10 compliant cables in technical solutions?

    • FRS-R-3-2/10 compliant cables provide increased safety and reliability by maintaining critical circuits during fire incidents, reducing the risk of electrical failure.
  10. Where can I find more information about FRS-R-3-2/10 and its application in technical solutions?

    • Additional information about FRS-R-3-2/10 and its application can be found in industry standards, technical publications, and from reputable cable manufacturers.