Central Semiconductor Corp
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
1N968B BK
צפה בפרטים DataSheets

1N968B BK

Product Overview

Category:

1N968B BK belongs to the category of semiconductor diodes.

Use:

It is commonly used as a rectifier diode in electronic circuits.

Characteristics:

  • Forward voltage drop: 0.7V
  • Reverse voltage: 100V
  • Maximum forward current: 1A
  • Fast switching speed

Package:

The 1N968B BK is typically available in a DO-41 package.

Essence:

The essence of this product lies in its ability to efficiently rectify alternating current into direct current in electronic circuits.

Packaging/Quantity:

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Forward Voltage Drop: 0.7V
  • Reverse Voltage: 100V
  • Maximum Forward Current: 1A
  • Package Type: DO-41
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The 1N968B BK has two pins, anode and cathode, which are identified by a line on the body of the diode.

Functional Features

  • Efficient rectification of AC to DC
  • Fast switching speed
  • Low forward voltage drop

Advantages

  • Fast switching speed allows for rapid response in circuits
  • Low forward voltage drop minimizes power loss
  • High reverse voltage rating provides robustness in various applications

Disadvantages

  • Limited maximum forward current compared to some higher-rated diodes
  • Sensitivity to temperature variations

Working Principles

The 1N968B BK operates based on the principle of creating a one-way flow of current when forward-biased, allowing it to convert AC to DC in electronic circuits.

Detailed Application Field Plans

This diode is widely used in: - Power supply units - Rectifiers - Voltage multipliers - Signal demodulation circuits

Detailed and Complete Alternative Models

Some alternative models to 1N968B BK include: - 1N4001: Similar forward voltage drop and reverse voltage rating - 1N4148: Faster switching speed but lower reverse voltage rating - 1N5819: Lower forward voltage drop and higher maximum forward current rating

In conclusion, the 1N968B BK is a semiconductor diode that finds extensive use in electronic circuits for rectification purposes due to its efficient performance and fast switching speed.

Word count: 366

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של 1N968B BK בפתרונות טכניים

  1. What is 1N968B BK?

    • 1N968B BK is a silicon rectifier diode commonly used in electronic circuits for converting alternating current (AC) to direct current (DC).

  2. What are the key specifications of 1N968B BK?

    • The 1N968B BK diode has a maximum repetitive peak reverse voltage of 1000V, a maximum average forward rectified current of 3A, and a typical forward voltage drop of 1.1V at 3A.

  3. How is 1N968B BK typically used in technical solutions?

    • It is commonly used in power supply circuits, battery chargers, and other applications where AC to DC conversion is required.

  4. What are the temperature considerations for 1N968B BK?

    • The operating temperature range for 1N968B BK is typically between -65°C to +175°C, making it suitable for a wide range of environments.

  5. Can 1N968B BK be used in high-frequency applications?

    • While 1N968B BK can function at moderate frequencies, it may not be suitable for very high-frequency applications due to its inherent capacitance and switching characteristics.

  6. Are there any common failure modes associated with 1N968B BK?

    • Common failure modes include overvoltage stress, excessive forward current, and thermal overstress, which can lead to degradation or failure of the diode.

  7. What are the alternatives to 1N968B BK for similar applications?

    • Alternatives include other silicon rectifier diodes with comparable voltage and current ratings, such as 1N400x series diodes.

  8. How should 1N968B BK be connected in a circuit?

    • It should be connected in the circuit with the anode terminal connected to the positive side and the cathode terminal connected to the negative side for proper rectification.

  9. What precautions should be taken when handling 1N968B BK?

    • Precautions include avoiding static discharge, ensuring proper heat dissipation, and following recommended soldering techniques to prevent damage to the diode.

  10. Where can I find detailed technical specifications and application notes for 1N968B BK?

    • Detailed specifications and application notes can typically be found in the datasheet provided by the manufacturer or distributor of the diode.