Central Semiconductor Corp
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
1.5CE11CA BK
צפה בפרטים DataSheets

1.5CE11CA BK Product Overview

Introduction

The 1.5CE11CA BK is a semiconductor product belonging to the category of diodes. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Diode
  • Use: Rectification and signal demodulation
  • Characteristics: High current capability, low forward voltage drop
  • Package: TO-220AB
  • Essence: Silicon rectifier diode
  • Packaging/Quantity: Typically packaged in reels or tubes, quantity varies by manufacturer

Specifications

  • Voltage Rating: 1500V
  • Current Rating: 1.5A
  • Maximum Forward Voltage Drop: 1.1V
  • Reverse Recovery Time: < 5μs
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The 1.5CE11CA BK diode has a standard TO-220AB package with three leads: anode, cathode, and gate. The pinout configuration is as follows: - Anode (A) - Pin 1 - Cathode (K) - Pin 2 - Gate (G) - Pin 3

Functional Features

  • High current capability for power applications
  • Low forward voltage drop minimizes power loss
  • Fast reverse recovery time for efficient switching

Advantages and Disadvantages

Advantages

  • High voltage rating suitable for industrial applications
  • Low forward voltage drop reduces power dissipation
  • Fast reverse recovery time enables high-frequency operation

Disadvantages

  • Relatively large package size compared to surface-mount diodes
  • Higher cost compared to standard silicon diodes

Working Principles

The 1.5CE11CA BK operates based on the principle of unidirectional conduction, allowing current flow in one direction while blocking it in the reverse direction. When forward-biased, it conducts current with minimal voltage drop, making it ideal for rectification and power supply applications.

Detailed Application Field Plans

The 1.5CE11CA BK diode finds extensive use in various applications, including: - Power supply units - Motor drives - Inverters - Welding equipment - Industrial control systems

Detailed and Complete Alternative Models

Several alternative models with similar specifications and characteristics include: - 1N4007 - UF4007 - FR157 - HER208 - MUR1560

In summary, the 1.5CE11CA BK diode offers high-voltage rectification capabilities with low forward voltage drop, making it suitable for diverse industrial and power electronics applications.

[Word Count: 398]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של 1.5CE11CA BK בפתרונות טכניים

Sure, here are 10 common questions and answers related to the application of 1.5CE11CA BK in technical solutions:

  1. What is 1.5CE11CA BK?

    • 1.5CE11CA BK is a type of diode rectifier that is commonly used in electronic circuits for converting alternating current (AC) to direct current (DC).

  2. What are the key features of 1.5CE11CA BK?

    • The key features of 1.5CE11CA BK include its high current capability, low forward voltage drop, and fast switching speed.

  3. How is 1.5CE11CA BK typically used in technical solutions?

    • 1.5CE11CA BK is often used in power supply circuits, battery chargers, and motor drive applications due to its efficient rectification and low power loss characteristics.

  4. What are the voltage and current ratings of 1.5CE11CA BK?

    • The typical voltage rating of 1.5CE11CA BK is around 1000V, and the current rating is approximately 15A.

  5. What precautions should be taken when using 1.5CE11CA BK in technical solutions?

    • It is important to ensure proper heat dissipation and voltage/current derating to prevent overheating and damage to the diode. Additionally, proper polarity and voltage ratings should be observed during installation.

  6. Can 1.5CE11CA BK be used in high-frequency applications?

    • Yes, 1.5CE11CA BK can be used in high-frequency applications due to its fast switching speed and low recovery time.

  7. Are there any alternative diodes that can be used in place of 1.5CE11CA BK?

    • Yes, other diodes with similar specifications such as 1N5408 or UF4007 can be used as alternatives to 1.5CE11CA BK depending on the specific application requirements.

  8. What are the temperature limitations of 1.5CE11CA BK?

    • The operating temperature range of 1.5CE11CA BK is typically between -65°C to +175°C, but it's important to refer to the datasheet for precise details.

  9. Can 1.5CE11CA BK be used in automotive electronics?

    • Yes, 1.5CE11CA BK is suitable for use in automotive electronics where reliable rectification and high current handling capabilities are required.

  10. Where can I find detailed technical specifications for 1.5CE11CA BK?

    • Detailed technical specifications for 1.5CE11CA BK can be found in the manufacturer's datasheet, which provides information on electrical characteristics, thermal properties, and package dimensions.

I hope these questions and answers provide a comprehensive overview of the application of 1.5CE11CA BK in technical solutions. If you have any further questions, feel free to ask!