Bourns Inc.
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
TIC236N-S
צפה בפרטים DataSheets

TIC236N-S

Product Overview

The TIC236N-S belongs to the category of semiconductor devices and is commonly used in electronic circuits for controlling power. This device exhibits specific characteristics, comes in a particular package, and has essential features that make it suitable for various applications.

Basic Information

  • Category: Semiconductor Device
  • Use: Power Control in Electronic Circuits
  • Characteristics: High Voltage Capability, Low Input Current, Fast Switching Speed
  • Package: TO-220
  • Essence: Efficient Power Control
  • Packaging/Quantity: Typically Sold in Reels or Trays

Specifications

The TIC236N-S has the following specifications: - Maximum Voltage: 600V - Maximum Current: 8A - Gate Trigger Current: 35mA - Holding Current: 50mA - Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

The TIC236N-S has a standard TO-220 package with three pins: 1. Pin 1: Anode 2. Pin 2: Gate 3. Pin 3: Cathode

Functional Features

  • High Voltage Capability: Allows for control of high-power loads.
  • Low Input Current: Enables efficient triggering of the device.
  • Fast Switching Speed: Facilitates rapid response in power control applications.

Advantages and Disadvantages

Advantages

  • Reliable Power Control
  • Suitable for High Voltage Applications
  • Low Input Power Requirement

Disadvantages

  • Limited Current Handling Capacity
  • Sensitive to Overvoltage Conditions

Working Principles

The TIC236N-S operates based on the principle of gate triggering to control the flow of power through the device. When the gate receives a sufficient trigger current, the device switches on, allowing power to pass through. This mechanism enables precise control over power delivery in electronic circuits.

Detailed Application Field Plans

The TIC236N-S finds application in various fields, including: - Motor Control Systems - Lighting Control Circuits - Heating Elements Control - Power Supply Units

Detailed and Complete Alternative Models

Some alternative models to the TIC236N-S include: - TIC226N-S - TIC246N-S - TIC206N-S

In conclusion, the TIC236N-S is a semiconductor device designed for efficient power control in electronic circuits. Its high voltage capability, low input current, and fast switching speed make it suitable for a range of applications, despite its limitations in current handling capacity and sensitivity to overvoltage conditions.

[Word Count: 324]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של TIC236N-S בפתרונות טכניים

  1. What is TIC236N-S?

    • TIC236N-S is a silicon controlled rectifier (SCR) designed for use in high power switching applications.

  2. What are the typical applications of TIC236N-S?

    • TIC236N-S is commonly used in AC motor control, industrial heating, and power supply circuits.

  3. What is the maximum voltage and current rating of TIC236N-S?

    • The maximum voltage rating is typically 600V, and the maximum current rating is around 25A.

  4. How does TIC236N-S compare to other SCRs in terms of performance?

    • TIC236N-S offers high surge current capability and excellent noise immunity, making it suitable for demanding industrial environments.

  5. What are the key features of TIC236N-S that make it suitable for technical solutions?

    • TIC236N-S features high dv/dt capability, high commutation di/dt capability, and low thermal resistance, making it reliable in various technical applications.

  6. What are the recommended heat sink and mounting techniques for TIC236N-S?

    • It is recommended to use a proper heat sink with good thermal conductivity and to ensure secure mounting to dissipate heat effectively.

  7. Are there any specific precautions to consider when using TIC236N-S in technical solutions?

    • It's important to follow proper handling procedures to avoid static discharge and to ensure proper insulation and cooling to maintain safe operating temperatures.

  8. Can TIC236N-S be used in both single-phase and three-phase applications?

    • Yes, TIC236N-S can be used in both single-phase and three-phase AC power control applications.

  9. What are the typical control signals required to drive TIC236N-S?

    • TIC236N-S requires a gate trigger signal to turn on and a commutation signal to turn off, which can be provided by microcontrollers or dedicated driver circuits.

  10. Where can I find detailed application notes and reference designs for using TIC236N-S in technical solutions?

    • Detailed application notes and reference designs for TIC236N-S can be found in the manufacturer's datasheets, application guides, and online technical resources.