Bourns Inc.
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
MF-R110-AP-99
צפה בפרטים DataSheets

MF-R110-AP-99 Product Overview

Introduction

The MF-R110-AP-99 is a vital component in the field of electronics and electrical engineering. This entry will provide an in-depth overview of this product, covering its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electrical/Electronic Component
  • Use: Overcurrent Protection
  • Characteristics: Resettable, Polymer PTC (Positive Temperature Coefficient) Fuse
  • Package: Radial Leaded
  • Essence: Provides overcurrent protection by limiting the flow of current in the circuit
  • Packaging/Quantity: Typically packaged in reels or bulk quantities

Specifications

  • Voltage Rating: 30V
  • Hold Current: 1.1A
  • Trip Current: 2.2A
  • Max Current: 40A
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The MF-R110-AP-99 has two radial leads for easy integration into circuit boards. The detailed pin configuration is as follows: - Pin 1: Connected to the positive terminal - Pin 2: Connected to the negative terminal

Functional Features

  • Resettable: Unlike traditional fuses, the MF-R110-AP-99 can reset itself after the fault condition is removed.
  • Overcurrent Protection: Limits the current flow in the circuit to prevent damage to sensitive components.

Advantages and Disadvantages

Advantages

  • Resettable nature increases longevity
  • Provides reliable overcurrent protection
  • Suitable for various electronic applications

Disadvantages

  • Limited maximum current handling capacity compared to traditional fuses
  • Sensitive to temperature variations

Working Principles

The MF-R110-AP-99 operates based on the principle of PTC thermistors. When the current exceeds the trip current, the device heats up, causing its resistance to increase significantly, thereby limiting the current flow.

Detailed Application Field Plans

The MF-R110-AP-99 finds extensive use in various electronic devices and systems, including: - Consumer Electronics - Automotive Electronics - Industrial Control Systems - Power Supplies

Detailed and Complete Alternative Models

  • MF-R160-0-99
  • MF-R050-0-99
  • MF-R500-0-99
  • MF-R005-0-99

In conclusion, the MF-R110-AP-99 is a crucial component in modern electronics, providing reliable overcurrent protection with its resettable and polymer-based design. Its application spans across diverse industries, making it an indispensable part of electronic circuitry.

Word Count: 410

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של MF-R110-AP-99 בפתרונות טכניים

  1. What is MF-R110-AP-99?

    • MF-R110-AP-99 is a type of resettable fuse, commonly used in electronic circuits to protect against overcurrent and short circuit conditions.

  2. What are the key features of MF-R110-AP-99?

    • The key features of MF-R110-AP-99 include its resettable nature, low resistance, high current handling capability, and suitability for various technical solutions.

  3. How does MF-R110-AP-99 work in technical solutions?

    • MF-R110-AP-99 works by automatically disconnecting the circuit when an overcurrent or short circuit occurs, and then resets itself once the fault is cleared, allowing the circuit to resume normal operation.

  4. What are the typical applications of MF-R110-AP-99 in technical solutions?

    • MF-R110-AP-99 is commonly used in power supplies, battery packs, automotive electronics, industrial equipment, and other electronic devices where overcurrent protection is required.

  5. What is the maximum current rating of MF-R110-AP-99?

    • The maximum current rating of MF-R110-AP-99 is typically 1.1A, making it suitable for protecting circuits with moderate current requirements.

  6. Can MF-R110-AP-99 be used in high-temperature environments?

    • Yes, MF-R110-AP-99 is designed to operate reliably in high-temperature environments, making it suitable for a wide range of technical solutions.

  7. Is MF-R110-AP-99 suitable for both AC and DC circuits?

    • Yes, MF-R110-AP-99 is suitable for use in both AC and DC circuits, providing versatile overcurrent protection in various technical applications.

  8. What is the typical response time of MF-R110-AP-99 to an overcurrent event?

    • The typical response time of MF-R110-AP-99 to an overcurrent event is very fast, helping to minimize the impact of faults on the protected circuit.

  9. Can MF-R110-AP-99 be used in consumer electronics?

    • Yes, MF-R110-AP-99 can be used in consumer electronics such as smartphones, tablets, and laptops to provide overcurrent protection for sensitive electronic components.

  10. Are there any special considerations for integrating MF-R110-AP-99 into technical solutions?

    • When integrating MF-R110-AP-99, it's important to consider the operating voltage, ambient temperature, and the specific requirements of the application to ensure optimal performance and protection.