QD Devices Inc.
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
ADIS16489BMLZ-P
צפה בפרטים DataSheets

ADIS16489BMLZ-P

Introduction

The ADIS16489BMLZ-P is a high-performance inertial measurement unit (IMU) designed for a wide range of applications. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Product Overview

  • Category: Inertial Measurement Unit (IMU)
  • Use: The ADIS16489BMLZ-P is used for precise motion sensing and control in various applications such as navigation systems, robotics, unmanned vehicles, and industrial equipment.
  • Characteristics: This IMU offers high accuracy, stability, and reliability in measuring acceleration, angular rate, and magnetic field data.
  • Package: The device is housed in a small, rugged module suitable for harsh environments.
  • Essence: The essence of the ADIS16489BMLZ-P lies in its ability to provide accurate motion data for critical control and navigation systems.
  • Packaging/Quantity: The product is typically available in individual packaging and quantities based on customer requirements.

Specifications

  • Acceleration Range: ±18 g
  • Angular Rate Range: ±2000°/sec
  • Magnetic Field Range: ±8 Gauss
  • Operating Temperature Range: -40°C to +105°C
  • Output Data Rate: Up to 4 kHz
  • Communication Interface: SPI or I2C

Detailed Pin Configuration

The ADIS16489BMLZ-P features a 24-pin connector with specific pins dedicated to power supply, communication interface, and sensor data outputs. A detailed pinout diagram is provided in the product datasheet.

Functional Features

  • High-accuracy triaxial accelerometer
  • High-precision triaxial gyroscope
  • Triaxial magnetometer for heading reference
  • Built-in self-test functionality for system health monitoring
  • Digital temperature sensor for compensation and calibration

Advantages and Disadvantages

Advantages

  • High accuracy and stability
  • Compact and rugged design
  • Wide operating temperature range
  • Built-in self-test for reliability monitoring

Disadvantages

  • Relatively higher cost compared to lower-end IMUs
  • Complex integration for some applications

Working Principles

The ADIS16489BMLZ-P operates on the principle of utilizing microelectromechanical systems (MEMS) sensors to measure and process acceleration, angular rate, and magnetic field data. These measurements are then processed and output through the communication interface for use in control and navigation systems.

Detailed Application Field Plans

The ADIS16489BMLZ-P is well-suited for the following applications: - Autonomous vehicle navigation and control - Unmanned aerial and ground vehicle stabilization - Precision industrial equipment control - Robotics and motion capture systems

Alternative Models

For users seeking alternatives to the ADIS16489BMLZ-P, the following models can be considered: - ADIS16488 - ADIS16485 - ADIS16480

In conclusion, the ADIS16489BMLZ-P is a high-performance IMU offering exceptional accuracy and stability for demanding motion sensing and control applications. Its robust design and advanced features make it a preferred choice for critical navigation and control systems across various industries.

Word Count: 470

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של ADIS16489BMLZ-P בפתרונות טכניים

  1. What is the operating voltage range of ADIS16489BMLZ-P?

    • The operating voltage range of ADIS16489BMLZ-P is 4.75V to 5.25V.

  2. What is the output data rate of ADIS16489BMLZ-P?

    • The output data rate of ADIS16489BMLZ-P is programmable up to 4 kHz.

  3. Can ADIS16489BMLZ-P be used in harsh environments?

    • Yes, ADIS16489BMLZ-P is designed for use in harsh environments and is rated for operation over a temperature range of -40°C to +125°C.

  4. What is the communication interface of ADIS16489BMLZ-P?

    • ADIS16489BMLZ-P uses an SPI (Serial Peripheral Interface) for communication with external devices.

  5. Does ADIS16489BMLZ-P have built-in self-test capabilities?

    • Yes, ADIS16489BMLZ-P features a self-test function that allows for diagnostic testing of the sensor.

  6. What are the typical applications of ADIS16489BMLZ-P?

    • Typical applications of ADIS16489BMLZ-P include inertial measurement units (IMUs), navigation systems, robotics, and stabilization systems.

  7. Is ADIS16489BMLZ-P suitable for automotive applications?

    • Yes, ADIS16489BMLZ-P is AEC-Q100 qualified and suitable for automotive applications.

  8. What is the resolution of the accelerometer and gyroscope in ADIS16489BMLZ-P?

    • The accelerometer has a resolution of 16 bits, and the gyroscope has a resolution of 14 bits.

  9. Does ADIS16489BMLZ-P have any integrated filtering options?

    • Yes, ADIS16489BMLZ-P features integrated digital filtering to reduce noise and improve data quality.

  10. Can ADIS16489BMLZ-P be powered directly from a battery source?

    • Yes, ADIS16489BMLZ-P can be powered directly from a single-cell lithium-ion battery or other appropriate power sources within its operating voltage range.