Amphenol Advanced Sensors
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
NPC-1210-030A-1-S
צפה בפרטים DataSheets

NPC-1210-030A-1-S

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: Small form factor, high efficiency
Package: SMD (Surface Mount Device)
Essence: Regulates voltage for electronic circuits
Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Input Voltage: 4.5V to 28V
  • Output Voltage: 0.8V to 5.5V
  • Output Current: 3A
  • Dropout Voltage: 330mV at 3A
  • Operating Temperature: -40°C to 125°C
  • Package Type: DFN (Dual Flat No-Lead)

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range
  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Adjustable output voltage

Advantages and Disadvantages

Advantages: - High efficiency - Small form factor - Wide operating temperature range

Disadvantages: - Limited output current compared to some alternatives - Not suitable for high-power applications

Working Principles

The NPC-1210-030A-1-S is a voltage regulator that maintains a stable output voltage regardless of changes in the input voltage or load. It achieves this by using feedback to adjust its internal circuitry, ensuring a consistent output.

Detailed Application Field Plans

This voltage regulator is ideal for use in various electronic devices, including: - Portable electronics - Automotive systems - Industrial control systems - Battery-powered devices

Detailed and Complete Alternative Models

  1. LM317: A popular adjustable voltage regulator with higher output current capability
  2. LT1083: Offers higher output current and lower dropout voltage for more demanding applications
  3. LM7805: Fixed 5V regulator commonly used in low-power circuits

In conclusion, the NPC-1210-030A-1-S is a versatile voltage regulator suitable for a wide range of electronic applications. Its compact size, efficiency, and robust features make it an excellent choice for designers seeking reliable voltage regulation in their circuits.

[Word Count: 314]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של NPC-1210-030A-1-S בפתרונות טכניים

  1. What is NPC-1210-030A-1-S?

    • NPC-1210-030A-1-S is a high-performance, compact, and efficient power inductor designed for various technical solutions.

  2. What are the key features of NPC-1210-030A-1-S?

    • The key features include high saturation current, low DC resistance, excellent temperature stability, and a compact size for space-constrained applications.

  3. In what technical solutions can NPC-1210-030A-1-S be used?

    • NPC-1210-030A-1-S can be used in a wide range of technical solutions such as power supplies, voltage regulators, DC-DC converters, and filtering applications.

  4. What is the maximum current rating of NPC-1210-030A-1-S?

    • The maximum current rating of NPC-1210-030A-1-S is typically specified by the manufacturer and depends on the specific application and operating conditions.

  5. What are the recommended operating conditions for NPC-1210-030A-1-S?

    • The recommended operating conditions include a specified input voltage range, temperature limits, and any other relevant environmental factors provided by the manufacturer.

  6. How does NPC-1210-030A-1-S compare to other similar power inductors?

    • NPC-1210-030A-1-S offers a balance of high performance, compact size, and efficiency compared to other similar power inductors available in the market.

  7. Are there any application notes or design guidelines available for using NPC-1210-030A-1-S?

    • Yes, the manufacturer typically provides application notes, design guidelines, and reference designs to assist engineers in implementing NPC-1210-030A-1-S in their technical solutions.

  8. What are the typical failure modes of NPC-1210-030A-1-S and how can they be mitigated?

    • Typical failure modes may include overheating, saturation, or mechanical damage. Mitigation strategies may involve proper thermal management, current derating, and mechanical support.

  9. Can NPC-1210-030A-1-S be used in automotive applications?

    • Depending on its specifications and certifications, NPC-1210-030A-1-S may be suitable for certain automotive applications. It's important to verify its compliance with automotive standards.

  10. Where can I purchase NPC-1210-030A-1-S and what is its typical lead time?

    • NPC-1210-030A-1-S can be purchased from authorized distributors or directly from the manufacturer. The typical lead time may vary based on availability and order quantity.