Amphenol Advanced Sensors
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
C100Y104J
צפה בפרטים DataSheets

C100Y104J Capacitor

Basic Information Overview

  • Category: Electronic Component
  • Use: Energy storage and filtering in electronic circuits
  • Characteristics: Ceramic material, high capacitance, small size
  • Package: Surface mount or through-hole
  • Essence: Capacitance
  • Packaging/Quantity: Typically packaged in reels or trays, quantity varies by manufacturer

Specifications

  • Capacitance: 0.1µF
  • Tolerance: ±5%
  • Voltage Rating: 50V
  • Dielectric Material: Ceramic
  • Temperature Coefficient: Y5R

Detailed Pin Configuration

  • Pin 1: Connected to one terminal of the capacitor
  • Pin 2: Connected to the other terminal of the capacitor

Functional Features

  • High capacitance for its size
  • Stable performance over a wide temperature range
  • Suitable for high-frequency applications

Advantages

  • Small size
  • High capacitance
  • Wide operating temperature range

Disadvantages

  • Limited voltage rating compared to some other capacitors
  • Tolerance may not be suitable for precision applications

Working Principles

C100Y104J is a ceramic capacitor that stores and releases electrical energy. When connected in a circuit, it can filter out noise and stabilize voltage levels.

Detailed Application Field Plans

  • Power supplies
  • Signal coupling
  • Decoupling

Detailed and Complete Alternative Models

  • C200Y104K: Higher capacitance, same voltage rating
  • C100Y103J: Lower capacitance, tighter tolerance

This information provides a comprehensive overview of the C100Y104J capacitor, including its specifications, features, and potential alternatives.

[Word count: 254]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של C100Y104J בפתרונות טכניים

  1. What is the purpose of using C100Y104J in technical solutions?

    • C100Y104J is a ceramic capacitor commonly used for filtering, decoupling, and bypassing in electronic circuits.

  2. What are the key specifications of C100Y104J?

    • C100Y104J typically has a capacitance of 0.1µF, a voltage rating of 100V, and a tolerance of ±5%.

  3. In what types of applications is C100Y104J commonly used?

    • C100Y104J is often used in power supplies, signal conditioning, noise suppression, and general electronic circuitry.

  4. How does C100Y104J differ from other capacitors?

    • C100Y104J is a ceramic capacitor, known for its stability, high capacitance density, and low cost compared to other types like electrolytic or tantalum capacitors.

  5. What are the temperature characteristics of C100Y104J?

    • C100Y104J exhibits a stable performance over a wide temperature range, making it suitable for various environmental conditions.

  6. Can C100Y104J be used for high-frequency applications?

    • Yes, C100Y104J is suitable for high-frequency applications due to its low equivalent series resistance (ESR) and inductance (ESL).

  7. Are there any limitations or considerations when using C100Y104J?

    • It's important to consider voltage derating, especially if operating near the maximum rated voltage, to ensure long-term reliability.

  8. What are the potential failure modes of C100Y104J?

    • Common failure modes include cracking due to mechanical stress, voltage overload, or excessive temperature.

  9. How can C100Y104J be soldered onto a PCB?

    • C100Y104J can be soldered using standard surface mount technology (SMT) or through-hole techniques, following recommended soldering profiles and guidelines.

  10. Where can I purchase C100Y104J for my technical project?

    • C100Y104J can be sourced from electronic component distributors, online retailers, or directly from manufacturers. It's important to verify the authenticity and quality of the components before purchasing.