Allegro MicroSystems, LLC
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
ACS716KLATR-12CB-NL-T
צפה בפרטים DataSheets

ACS716KLATR-12CB-NL-T

Product Overview

Category

The ACS716KLATR-12CB-NL-T belongs to the category of current sensor ICs.

Use

It is used for measuring current in various electronic applications.

Characteristics

  • High accuracy
  • Low offset voltage
  • Wide dynamic range

Package

The ACS716KLATR-12CB-NL-T comes in a small surface-mount package.

Essence

This product is essential for precise current measurement in electronic circuits.

Packaging/Quantity

It is typically packaged in reels and available in varying quantities.

Specifications

  • Operating Voltage: 3V to 5.5V
  • Output Voltage: 0.6V to 2.4V
  • Current Sensing Range: ±12.5A
  • Bandwidth: 120kHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The ACS716KLATR-12CB-NL-T has a detailed pin configuration with specific pins designated for power, ground, and output connections.

Functional Features

  • High sensitivity
  • Low noise
  • Overcurrent detection
  • Integrated overvoltage protection

Advantages

  • Accurate current measurement
  • Wide operating temperature range
  • Integrated protection features

Disadvantages

  • Limited current sensing range compared to some alternatives
  • Sensitive to electromagnetic interference

Working Principles

The ACS716KLATR-12CB-NL-T utilizes the Hall effect to measure current by detecting the magnetic field generated by the flowing current.

Detailed Application Field Plans

This sensor is commonly used in: - Motor control systems - Power supplies - Battery management systems - Industrial automation

Detailed and Complete Alternative Models

Some alternative models to consider are: - ACS712 - ACS758 - INA219

In conclusion, the ACS716KLATR-12CB-NL-T is a versatile current sensor IC with high accuracy and integrated protection features, making it suitable for a wide range of electronic applications.

[Word count: 294]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של ACS716KLATR-12CB-NL-T בפתרונות טכניים

  1. What is the ACS716KLATR-12CB-NL-T?

    • The ACS716KLATR-12CB-NL-T is a high-precision, fully integrated current sensor IC designed for use in applications requiring accurate current measurement.

  2. What is the operating voltage range of the ACS716KLATR-12CB-NL-T?

    • The operating voltage range of the ACS716KLATR-12CB-NL-T is typically between 3.0V and 5.5V.

  3. What is the output signal format of the ACS716KLATR-12CB-NL-T?

    • The ACS716KLATR-12CB-NL-T provides an analog output voltage proportional to the sensed current, making it suitable for interfacing with microcontrollers or ADCs.

  4. What is the typical accuracy of the ACS716KLATR-12CB-NL-T?

    • The ACS716KLATR-12CB-NL-T offers a typical accuracy of ±1.5% over the full operating temperature range.

  5. What is the maximum continuous current that the ACS716KLATR-12CB-NL-T can measure?

    • The ACS716KLATR-12CB-NL-T is capable of measuring continuous currents up to 12A.

  6. Does the ACS716KLATR-12CB-NL-T require an external shunt resistor?

    • No, the ACS716KLATR-12CB-NL-T is a fully integrated current sensor, eliminating the need for an external shunt resistor.

  7. Is the ACS716KLATR-12CB-NL-T suitable for automotive applications?

    • Yes, the ACS716KLATR-12CB-NL-T is AEC-Q100 qualified, making it suitable for automotive applications.

  8. What is the package type of the ACS716KLATR-12CB-NL-T?

    • The ACS716KLATR-12CB-NL-T is available in a small, surface-mount SOIC-16 package.

  9. Can the ACS716KLATR-12CB-NL-T be used for battery management systems?

    • Yes, the ACS716KLATR-12CB-NL-T is well-suited for battery management systems due to its high accuracy and low offset drift.

  10. What are some common applications for the ACS716KLATR-12CB-NL-T?

    • Common applications for the ACS716KLATR-12CB-NL-T include motor control, power management, battery monitoring, and industrial automation.