ACS709LLFTR-20BB-T
Product Category
The ACS709LLFTR-20BB-T belongs to the category of current sensor integrated circuits.
Basic Information Overview
- Use: The ACS709LLFTR-20BB-T is used for measuring electrical current in various applications.
- Characteristics: It features high accuracy, low offset voltage, and a wide operating temperature range.
- Package: The ACS709LLFTR-20BB-T is available in a small surface-mount package.
- Essence: Its essence lies in providing precise current measurement for different electronic systems.
- Packaging/Quantity: Typically, it is supplied in reels with a specific quantity per reel.
Specifications
The ACS709LLFTR-20BB-T has the following specifications: - Operating Voltage: 3V to 5.5V - Output Type: Analog Voltage - Current Sensing Range: ±20A - Operating Temperature Range: -40°C to 125°C - Package Type: Surface Mount
Detailed Pin Configuration
The ACS709LLFTR-20BB-T has a pin configuration as follows: 1. VCC 2. GND 3. Output 4. NC (Not Connected)
Functional Features
- High Accuracy: Provides precise current measurement with low error margin.
- Low Offset Voltage: Minimizes errors in current sensing.
- Wide Operating Temperature Range: Suitable for diverse environmental conditions.
Advantages and Disadvantages
Advantages: - Accurate current measurement - Wide operating temperature range - Small form factor
Disadvantages: - Limited current sensing range compared to some other models - Requires external calibration for optimal performance
Working Principles
The ACS709LLFTR-20BB-T utilizes the Hall effect to measure current. When current flows through the conductor, it creates a magnetic field which is sensed by the integrated Hall sensor, producing an output voltage proportional to the current.
Detailed Application Field Plans
The ACS709LLFTR-20BB-T is suitable for various applications including: - Motor control systems - Power supplies - Battery management systems - Industrial automation
Detailed and Complete Alternative Models
Some alternative models to the ACS709LLFTR-20BB-T include: - ACS712ELCTR-05B-T - ACS758LCB-100B-PFF-T - ACS770LCB-050B-PFF-T
This completes the entry for the ACS709LLFTR-20BB-T within the specified word count.
רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של ACS709LLFTR-20BB-T בפתרונות טכניים
What is the ACS709LLFTR-20BB-T?
- The ACS709LLFTR-20BB-T is a high-precision, fully integrated Hall-effect-based linear current sensor designed for applications requiring high accuracy and reliability.
What is the operating voltage range of the ACS709LLFTR-20BB-T?
- The operating voltage range of the ACS709LLFTR-20BB-T is from 3 V to 5.5 V.
What is the typical output sensitivity of the ACS709LLFTR-20BB-T?
- The typical output sensitivity of the ACS709LLFTR-20BB-T is 100 mV/A.
What is the maximum continuous current that can be measured using the ACS709LLFTR-20BB-T?
- The ACS709LLFTR-20BB-T can measure a maximum continuous current of ±20 A.
What is the output voltage range of the ACS709LLFTR-20BB-T?
- The output voltage range of the ACS709LLFTR-20BB-T is from 0.5 V to 4.5 V.
What are the typical applications of the ACS709LLFTR-20BB-T?
- Typical applications of the ACS709LLFTR-20BB-T include motor control, load detection and management, power supplies, and overcurrent fault protection.
Is the ACS709LLFTR-20BB-T suitable for automotive applications?
- Yes, the ACS709LLFTR-20BB-T is suitable for automotive applications due to its high precision and reliability.
Does the ACS709LLFTR-20BB-T require external calibration?
- No, the ACS709LLFTR-20BB-T does not require external calibration, making it easy to integrate into technical solutions.
What is the temperature range for operation of the ACS709LLFTR-20BB-T?
- The ACS709LLFTR-20BB-T has an operating temperature range from -40°C to 125°C.
Is the ACS709LLFTR-20BB-T RoHS compliant?
- Yes, the ACS709LLFTR-20BB-T is RoHS compliant, meeting environmental standards for electronic components.