התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
S-80132ALPF-JARTFG

S-80132ALPF-JARTFG

Product Overview

Category

S-80132ALPF-JARTFG belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Low dropout voltage: The S-80132ALPF-JARTFG has a low dropout voltage, allowing it to regulate voltage efficiently even when the input voltage is close to the desired output voltage.
  • High accuracy: This IC provides precise voltage regulation, ensuring stable and reliable performance of the connected electronic components.
  • Low quiescent current: The S-80132ALPF-JARTFG consumes minimal power during standby or idle mode, contributing to energy efficiency.
  • Thermal shutdown protection: It incorporates a thermal shutdown feature that protects the IC from overheating, preventing damage to the device and enhancing safety.

Package

The S-80132ALPF-JARTFG is available in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of S-80132ALPF-JARTFG lies in its ability to regulate voltage with high accuracy and efficiency, while consuming minimal power.

Packaging/Quantity

This IC is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-80132ALPF-JARTFG has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin (active high)
  5. NRST: Reset pin (active low)

Functional Features

  • Voltage regulation: The S-80132ALPF-JARTFG regulates the output voltage based on the input voltage and provides a stable output for connected devices.
  • Overcurrent protection: It incorporates overcurrent protection, safeguarding the IC and connected components from excessive current flow.
  • Short-circuit protection: This IC features short-circuit protection, preventing damage to the device in case of a short circuit.
  • Power sequencing: It supports power sequencing, allowing controlled startup and shutdown of the device.

Advantages and Disadvantages

Advantages

  • High accuracy voltage regulation
  • Low dropout voltage
  • Low quiescent current consumption
  • Thermal shutdown protection
  • Compact package size

Disadvantages

  • Limited input voltage range (2.5V - 6.0V)
  • Limited output voltage range (1.2V - 5.0V)

Working Principles

The S-80132ALPF-JARTFG utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the internal circuit accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The S-80132ALPF-JARTFG is widely used in various electronic devices that require precise voltage regulation, such as:

  1. Mobile phones and smartphones
  2. Portable media players
  3. Digital cameras
  4. Wireless communication devices
  5. Battery-powered devices

Detailed and Complete Alternative Models

  1. S-80132BLPF-JARTFG
  2. S-80132CLPF-JARTFG
  3. S-80132DLPF-JARTFG
  4. S-80132ELPF-JARTFG

These alternative models offer similar functionality and characteristics, providing options for different voltage requirements or specific application needs.

In conclusion, the S-80132ALPF-JARTFG is a highly reliable integrated circuit that excels in voltage regulation and power management. Its low dropout voltage, high accuracy, and thermal shutdown protection make it an ideal choice for various electronic devices. However, its limited input and output voltage ranges should be considered when selecting this IC for specific applications.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של S-80132ALPF-JARTFG בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of S-80132ALPF-JARTFG in technical solutions:

  1. Question: What is S-80132ALPF-JARTFG?
    Answer: S-80132ALPF-JARTFG is a specific model of a semiconductor device, typically used as a voltage regulator in various technical applications.

  2. Question: What is the input voltage range for S-80132ALPF-JARTFG?
    Answer: The input voltage range for S-80132ALPF-JARTFG is typically between 2.5V and 6.0V.

  3. Question: What is the output voltage range for S-80132ALPF-JARTFG?
    Answer: The output voltage range for S-80132ALPF-JARTFG is typically between 1.2V and 5.5V.

  4. Question: What is the maximum output current of S-80132ALPF-JARTFG?
    Answer: The maximum output current of S-80132ALPF-JARTFG is typically around 100mA.

  5. Question: What is the operating temperature range for S-80132ALPF-JARTFG?
    Answer: The operating temperature range for S-80132ALPF-JARTFG is typically between -40°C and +85°C.

  6. Question: Can S-80132ALPF-JARTFG be used in battery-powered devices?
    Answer: Yes, S-80132ALPF-JARTFG can be used in battery-powered devices due to its low power consumption and wide input voltage range.

  7. Question: Is S-80132ALPF-JARTFG suitable for automotive applications?
    Answer: Yes, S-80132ALPF-JARTFG is designed to meet automotive standards and can be used in automotive applications.

  8. Question: Does S-80132ALPF-JARTFG have built-in protection features?
    Answer: Yes, S-80132ALPF-JARTFG has built-in protection features such as overcurrent protection and thermal shutdown.

  9. Question: Can S-80132ALPF-JARTFG be used in high-frequency applications?
    Answer: Yes, S-80132ALPF-JARTFG is designed to operate in high-frequency applications with minimal output voltage fluctuations.

  10. Question: What are some typical applications of S-80132ALPF-JARTFG?
    Answer: Some typical applications of S-80132ALPF-JARTFG include power management in portable devices, consumer electronics, industrial equipment, and automotive systems.

Please note that the specific details mentioned above may vary depending on the manufacturer's specifications and application requirements.