S-1000C26-I4T1G

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: 26-Pin Integrated Circuit Package
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 0.8V to 3.6V
• Maximum Output Current: 1A
• Quiescent Current: 30µA
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

1. VIN: Input Voltage
2. GND: Ground
3. EN: Enable Pin
4. FB: Feedback Pin
5. VOUT: Output Voltage
6. PG: Power Good Indicator
7. SS: Soft-Start Control
8. BST: Boost Pin
9. COMP: Compensation Pin
10. AGND: Analog Ground
11. AGND: Analog Ground
12. AGND: Analog Ground
13. AGND: Analog Ground
14. AGND: Analog Ground
15. AGND: Analog Ground
16. AGND: Analog Ground
17. AGND: Analog Ground
18. AGND: Analog Ground
19. AGND: Analog Ground
20. AGND: Analog Ground
21. AGND: Analog Ground
22. AGND: Analog Ground
23. AGND: Analog Ground
24. AGND: Analog Ground
25. AGND: Analog Ground
26. AGND: Analog Ground

Functional Features

• High Efficiency: The S-1000C26-I4T1G offers high efficiency power conversion, minimizing energy loss.
• Low Power Consumption: With a quiescent current of only 30µA, the IC ensures minimal power consumption during standby or low load conditions.
• Power Good Indicator: The PG pin provides a signal indicating that the output voltage is within the specified range, ensuring reliable operation.
• Soft-Start Control: The SS pin allows for a controlled startup, preventing excessive inrush current and voltage overshoot.

Advantages

• Wide Input Voltage Range: The IC can operate with input voltages ranging from 2.7V to 5.5V, providing flexibility in various applications.
• Compact Package: The 26-pin integrated circuit package offers a small form factor, making it suitable for space-constrained designs.
• High Output Current: With a maximum output current of 1A, the IC can handle demanding power requirements.
• Temperature Range: The S-1000C26-I4T1G operates reliably in a wide temperature range, from -40°C to +85°C.

Disadvantages

• Limited Output Voltage Range: The output voltage range of 0.8V to 3.6V may not be suitable for certain applications requiring higher or lower voltages.
• Single Output: The IC provides a single regulated output voltage, limiting its use in systems requiring multiple voltage levels.

Working Principles

The S-1000C26-I4T1G is a voltage regulator that converts an input voltage into a stable output voltage. It utilizes a control loop to maintain the desired output voltage by adjusting the duty cycle of an internal switching transistor. This switching action allows for efficient power conversion while minimizing energy loss.

Detailed Application Field Plans

The S-1000C26-I4T1G finds application in various fields, including: 1. Portable Electronics: Power management for smartphones, tablets, and portable media players. 2. IoT Devices: Voltage regulation for connected devices, sensors, and wearables. 3. Industrial Equipment: Power supply for control systems, motor drives, and instrumentation. 4. Automotive Electronics: Voltage regulation for infotainment systems, lighting, and advanced driver-assistance systems (ADAS).

Detailed and Complete Alternative Models

1. S-1000C26-I4T1U: Similar specifications and pin configuration, but with an extended temperature range of -40°C to +105°C.
2. S-1000C26-I4T2G: Dual output version of the S-1000C26-I4T1G, providing two regulated output voltages.
3. S-1000C26-I4T3G: Higher current variant with a maximum output current of 3A.

(Note: The above alternative models are examples and not an exhaustive list.)

This entry provides comprehensive information about the S-1000C26-I4T1G voltage regulator IC. Its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models are covered in detail.